{"title":"Fire Hose Equipment: Connect, Contain, Conquer Fire","description":"\u003cp\u003eBrowse fire hose connection and storage equipment, including hose rack assemblies, angle and gate hose valves, pressure-reducing hose valves, fire department connections (FDCs), reducers, caps, plugs, chains, swivel gaskets and wall plates.\u003c\/p\u003e\n\u003cp\u003eMatch each connection to the specified size, thread designation and male or female configuration. Check the exact product documentation and the mating equipment rather than assuming that similarly sized hose and pipe threads are interchangeable. For FDC assemblies, confirm inlet and outlet arrangements, mounting requirements and included components.\u003c\/p\u003e\n\u003cp\u003eSelect hose valves using the documented pressure limits, connection details and installation requirements. For pressure-reducing models, verify the required inlet and outlet conditions, flow range, adjustment procedure and testing instructions with the manufacturer and system designer. Do not select a valve by nominal size or finish alone.\u003c\/p\u003e\n\u003cp\u003eCheck rack dimensions and hose capacity, and confirm whether hose, covers and mounting hardware are included. Match replacement caps, plugs and gaskets to the exact connection or assembly. Follow the applicable manufacturer instructions for installation, inspection, testing and maintenance; collection placement does not establish compatibility or suitability for a particular system.\u003c\/p\u003e","products":[{"product_id":"2-1-2-standpipe-hose-valve-ab-r-bt-fire-protection","title":"2-1\/2\" Standpipe Hose Valve Ab R-Bt Fire Protection","description":"\u003cp\u003eThe Zurn Wilkins Pressure-Tru ZW4000 is a 2-1\/2-inch factory-set pressure-reducing fire hose valve with a male hose-thread outlet, intended for individual hose stations in Class I and Class III standpipe systems.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eListed ordering code:\u003c\/strong\u003e ZW4000-R.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure regulation:\u003c\/strong\u003e Regulates pressure under both flow and no-flow conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSetting:\u003c\/strong\u003e Factory set; not field adjustable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet:\u003c\/strong\u003e Male hose thread; confirm the exact required hose-thread specification before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eConfirm the complete ordering code and factory pressure setting against the project requirements before ordering. The setting associated with this listing's suffix has not been verified here; do not infer a numerical outlet pressure from the suffix alone. Follow the manufacturer's selection, installation, and testing instructions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer model reference:\u003c\/strong\u003e \u003ca href=\"https:\/\/www.zurn.com\/products\/fire-protection\/fire-valves\/pressure-regulating-valves\/zw4000\"\u003eZurn Pressure-Tru ZW4000 product information\u003c\/a\u003e.\u003c\/p\u003e","brand":"Zurn Wilkins","offers":[{"title":"Default Title","offer_id":46202620379384,"sku":"ZW4000-R","price":626.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/7183\/3336\/files\/ZW4000_AL_586dc959-a685-4bca-9a9c-488d480e15fe.webp?v=1793722838"},{"product_id":"2-1-2-standpipe-hose-valve-ab-s-bt-fire-protection","title":"2-1\/2\" Standpipe Hose Valve Ab S-Bt Fire Protection","description":"\u003cp\u003eThe Zurn Wilkins Pressure-Tru ZW4000 is a 2-1\/2-inch factory-set pressure-reducing fire hose valve with a male hose-thread outlet, intended for individual hose stations in Class I and Class III standpipe systems.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eListed ordering code:\u003c\/strong\u003e ZW4000-S.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure regulation:\u003c\/strong\u003e Regulates pressure under both flow and no-flow conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSetting:\u003c\/strong\u003e Factory set; not field adjustable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet:\u003c\/strong\u003e Male hose thread; confirm the exact required hose-thread specification before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eConfirm the complete ordering code and factory pressure setting against the project requirements before ordering. The setting associated with this listing's suffix has not been verified here; do not infer a numerical outlet pressure from the suffix alone. Follow the manufacturer's selection, installation, and testing instructions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer model reference:\u003c\/strong\u003e \u003ca href=\"https:\/\/www.zurn.com\/products\/fire-protection\/fire-valves\/pressure-regulating-valves\/zw4000\"\u003eZurn Pressure-Tru ZW4000 product information\u003c\/a\u003e.\u003c\/p\u003e","brand":"Zurn Wilkins","offers":[{"title":"Default Title","offer_id":46202620477688,"sku":"ZW4000-S","price":626.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/7183\/3336\/files\/ZW4000_AL_f3191b4e-b5c0-4798-9425-b86e1db3fc6d.webp?v=1793723090"},{"product_id":"2-1-2-standpipe-hose-valve-ab-t-bt-fire-protection","title":"2-1\/2\" Standpipe Hose Valve Ab T-Bt Fire Protection","description":"\u003cp\u003eThe Zurn Wilkins Pressure-Tru ZW4000 is a 2-1\/2-inch factory-set pressure-reducing fire hose valve with a male hose-thread outlet, intended for individual hose stations in Class I and Class III standpipe systems.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eListed ordering code:\u003c\/strong\u003e ZW4000-T.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure regulation:\u003c\/strong\u003e Regulates pressure under both flow and no-flow conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSetting:\u003c\/strong\u003e Factory set; not field adjustable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet:\u003c\/strong\u003e Male hose thread; confirm the exact required hose-thread specification before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eConfirm the complete ordering code and factory pressure setting against the project requirements before ordering. The setting associated with this listing's suffix has not been verified here; do not infer a numerical outlet pressure from the suffix alone. Follow the manufacturer's selection, installation, and testing instructions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer model reference:\u003c\/strong\u003e \u003ca href=\"https:\/\/www.zurn.com\/products\/fire-protection\/fire-valves\/pressure-regulating-valves\/zw4000\"\u003eZurn Pressure-Tru ZW4000 product information\u003c\/a\u003e.\u003c\/p\u003e","brand":"Zurn Wilkins","offers":[{"title":"Default Title","offer_id":46202620543224,"sku":"ZW4000-T","price":626.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/7183\/3336\/files\/2-12-standpipe-hose-valve-ab-t-bt-fire-protection-6709512.jpg?v=1774498803"},{"product_id":"2-1-2-standpipe-hose-valve-ab-u-bt-for-fire-protection","title":"2-1\/2\" Standpipe Hose Valve Ab U-Bt for Fire Protection","description":"\u003cp\u003eThe Zurn Wilkins Pressure-Tru ZW4000 is a 2-1\/2-inch factory-set pressure-reducing fire hose valve with a male hose-thread outlet, intended for individual hose stations in Class I and Class III standpipe systems.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eListed ordering code:\u003c\/strong\u003e ZW4000-U.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure regulation:\u003c\/strong\u003e Regulates pressure under both flow and no-flow conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSetting:\u003c\/strong\u003e Factory set; not field adjustable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet:\u003c\/strong\u003e Male hose thread; confirm the exact required hose-thread specification before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eConfirm the complete ordering code and factory pressure setting against the project requirements before ordering. The setting associated with this listing's suffix has not been verified here; do not infer a numerical outlet pressure from the suffix alone. Follow the manufacturer's selection, installation, and testing instructions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer model reference:\u003c\/strong\u003e \u003ca href=\"https:\/\/www.zurn.com\/products\/fire-protection\/fire-valves\/pressure-regulating-valves\/zw4000\"\u003eZurn Pressure-Tru ZW4000 product information\u003c\/a\u003e.\u003c\/p\u003e","brand":"Zurn Wilkins","offers":[{"title":"Default Title","offer_id":46202620641528,"sku":"ZW4000-U","price":626.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/7183\/3336\/files\/image_20261017_220013.jpg?v=1792252970"},{"product_id":"4-x-4-storz-body-start-and-cap-for-fire-systems","title":"4\" X 4\" Storz Body Start and Cap for Fire Systems","description":"\u003cp\u003eThe FPPI 09-205 is a straight Storz fire-department connection assembly with a body and cap. The 4-inch Storz connection provides a hose interface to the assembly's 4-inch female NPT pipe connection.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eConfiguration\u003c\/b\u003e: 4-inch Storz by 4-inch female NPT, straight body and cap assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eManufacturer reference pressure rating\u003c\/b\u003e: 250 psi.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePipe threads\u003c\/b\u003e: NPT, per ASME B1.20.1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDebris protection\u003c\/b\u003e: Metal screen in the body.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCap design\u003c\/b\u003e: Protective Storz cap; the manufacturer's listed protective caps have a weep hole to reduce the risk of unintended pressurization.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eMatch the Storz size and pipe connection to the installation and local fire-service requirements. The manufacturer's cap instructions specify a one-eighth-turn engagement, not a quarter turn. Follow the assembly instructions and use the specified test cap when testing; do not assume a vented protective cap is a pressure-test closure.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.asc-es.com\/resource\/09-200%20FPPI%20Storz%20Type%20Fire%20Dept%20Connections%20Submittal\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer Storz connection technical data (PDF)\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.supplynet.com\/4x4-storz-assy-strt-fnpt-ul-09-205-00\/\" target=\"_blank\" rel=\"noopener\"\u003eDistributor item and configuration reference\u003c\/a\u003e\u003c\/p\u003e","brand":"Fire Protection Products Inc","offers":[{"title":"Default Title","offer_id":46202635714808,"sku":"09-205","price":168.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/7183\/3336\/files\/4-x-4-storz-body-strt-cap-284445.png?v=1776004249"},{"product_id":"2-1-2-inch-aluminum-breakable-caps-durable-emergency-access","title":"FPPI 2-1\/2-Inch Aluminum Breakable FDC Caps, Red","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\u003cp\u003eThese FPPI cast-aluminum breakable caps protect compatible 2-1\/2-inch pin-lug fire department connection swivels against introduced foreign material. Their scored mounting tabs are designed to break away for hose connection using a hydrant wrench or similar tool.\u003c\/p\u003e\u003ch3\u003eKey Features \u0026amp; Construction\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCast aluminum with red finish.\u003c\/li\u003e\n\u003cli\u003eScored tabs provide the breakaway feature; do not describe removal as tool-free.\u003c\/li\u003e\n\u003cli\u003eEyelets fit over the swivel’s pin lugs and are secured with finished hexnuts.\u003c\/li\u003e\n\u003cli\u003eThe manufacturer’s set includes two caps, four eyelets and four finished hexnuts; confirm the selling pack with the order.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications \u0026amp; Compliance\u003c\/h3\u003e\u003ctable style=\"border-collapse:collapse;width:100%\" border=\"1\" cellpadding=\"8\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth style=\"border:1px solid #888\"\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth style=\"border:1px solid #888\"\u003e\u003cstrong\u003eDetail\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #888\"\u003eBrand\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #888\"\u003eFPPI \/ ASC Engineered Solutions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #888\"\u003eListed part code\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #888\"\u003e09-505\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #888\"\u003eApplication\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #888\"\u003eFire department connection swivel protection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #888\"\u003eNominal swivel size\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #888\"\u003e2-1\/2 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #888\"\u003eMaterial \/ finish\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #888\"\u003eCast aluminum \/ red\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #888\"\u003eAttachment\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #888\"\u003ePin-lug eyelets with hexnuts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eSubmittal \u0026amp; Installation Note\u003c\/h3\u003e\u003cp\u003eConfirm requirements with the Authority Having Jurisdiction (AHJ) and consult the applicable manufacturer technical data and installation instructions. Check the swivel size and lug arrangement against the manufacturer’s metal break-cap data. Tighten hardware as instructed without overtightening the scored tabs. These are debris-protection caps, not a claim of a pressure-tight seal or a substitute for the required FDC components.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.asc-es.com\/resource\/09-503%20FPPI%20FDC%20Breakable%20Caps%20Metal%20Submittal\"\u003eFPPI metal breakable cap manufacturer data\u003c\/a\u003e | \u003ca href=\"https:\/\/www.asc-es.com\/resource\/09-121%20FPPI%20FDC%20Double%20Clapper%20Siamese%20Submittal\"\u003eFPPI FDC accessory part-number reference\u003c\/a\u003e\u003c\/p\u003e","brand":"Fire Protection Products Inc","offers":[{"title":"Default Title","offer_id":46202636435704,"sku":"09-505","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/7183\/3336\/files\/2-12-inch-aluminum-breakable-caps-durable-emergency-access-6485278.webp?v=1778955120"},{"product_id":"2-1-2-pr-fire-hose-valve-mht-for-reliable-protection","title":"2-1\/2\" Pr Fire Hose Valve Mht for Reliable Protection","description":"\u003cp\u003eZurn Wilkins Z3000 is the cataloged 2-1\/2-inch pressure-reducing fire hose valve with a male hose-thread designation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eSize and outlet designation\u003c\/b\u003e: The exact record specifies 2-1\/2-inch and MHT.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExact identification\u003c\/b\u003e: Supplier and vendor references are both Z3000.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe complete model reference helps match the intended hose-station valve. Confirm inlet details, hose-thread standard, adjustment range and current manufacturer installation instructions before ordering; the supplier record does not specify those limits.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/vsncatalog.supplynet.com\/configure\/Z3000\"\u003eSupplyNet exact Z3000 item reference\u003c\/a\u003e\u003c\/p\u003e","brand":"Zurn Wilkins","offers":[{"title":"Default Title","offer_id":46202836746488,"sku":"Z3000","price":1435.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/7183\/3336\/files\/2-12-pr-fire-hose-valve-mht-for-reliable-protection-1959185-2-12-pr-fire-hose-valve-mht-for-reliable-2.jpg?v=1792250465"},{"product_id":"fppi-07-260-tempe-hose-cap-chain-2-1-2-inch","title":"FPPI 07-260 Tempe Hose Cap and Chain, 2-1\/2 Inch","description":"\u003cp\u003eThe FPPI 07-260 is a 2-1\/2-inch Tempe-thread brass hose cap with chain for protecting a compatible male hose connection from debris. Its regional thread must match the hydrant or valve outlet.\u003c\/p\u003e\u003ch3\u003eFeatures and construction\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCap construction\u003c\/b\u003e: B124 brass with a gasket.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRetention\u003c\/b\u003e: Brass chain and S-type attachment hook.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHandling\u003c\/b\u003e: Pin-lug design for fire-service pin-lug hydrant wrenches; not a tool-free universal cap.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread selection\u003c\/b\u003e: Tempe hose thread is a specific configuration, not interchangeable with every nominal 2-1\/2-inch outlet.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical reference\u003c\/h3\u003e\u003ctable\u003e \u003cthead\u003e \u003ctr\u003e \u003cth\u003e\u003cb\u003eTechnical Specification\u003c\/b\u003e\u003c\/th\u003e \u003cth\u003e\u003cb\u003eValue\u003c\/b\u003e\u003c\/th\u003e \u003c\/tr\u003e \u003c\/thead\u003e\n\u003ctbody\u003e \u003ctr\u003e \u003ctd\u003e\u003cb\u003eManufacturer \/ Brand\u003c\/b\u003e\u003c\/td\u003e \u003ctd\u003eFire Protection Products Inc. (FPPI)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cb\u003eModel \/ Series Number \/ SIN\u003c\/b\u003e\u003c\/td\u003e \u003ctd\u003e07-260, Tempe hose-thread cap and chain\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cb\u003eConnection \/ Thread Size \u0026amp; Type\u003c\/b\u003e\u003c\/td\u003e \u003ctd\u003e2-1\/2-inch female TEM (Tempe) hose thread; not universal NST\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cb\u003eMaterial \/ Body Construction\u003c\/b\u003e\u003c\/td\u003e \u003ctd\u003eB124 brass with gasket\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cb\u003eInstallation method\u003c\/b\u003e\u003c\/td\u003e \u003ctd\u003ePin-lug design; tighten with two pin-lug hydrant wrenches\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cb\u003eSelection requirements\u003c\/b\u003e\u003c\/td\u003e \u003ctd\u003eMatch the exact mating thread and follow manufacturer and AHJ requirements\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eConfirm the outlet thread, clean the mating threads and waterway, and install according to FPPI instructions. The protective cap does not replace required valves, inspection or system maintenance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer reference:\u003c\/strong\u003e \u003ca href=\"https:\/\/www.asc-es.com\/resource\/07-200%20FPPI%20Brass%20Cap%20Submittal\"\u003eFPPI brass-cap submittal, April 2022\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExact product reference:\u003c\/strong\u003e \u003ca href=\"https:\/\/www.supplynet.com\/07-260\/\"\u003eSupplyNet FPPI 07-260 Tempe cap listing\u003c\/a\u003e\u003c\/p\u003e","brand":"Fire Protection Products Inc","offers":[{"title":"Default Title","offer_id":46202837827832,"sku":"07-260","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/7183\/3336\/files\/2-12-hose-cap-tempe-for-fire-hydrants-and-valves-3671928.png?v=1776004378"},{"product_id":"fppi-09-660-tempe-open-snoot-fdc-assembly-kit-2-1-2-inch","title":"FPPI 09-660 Tempe Open-Snoot FDC Assembly Kit, 2-1\/2 Inch","description":"\u003cp\u003eThe FPPI 09-660 is a 2-1\/2-inch Tempe-thread open-snoot assembly kit for a compatible fire department connection installation. It includes the connection accessory components rather than an entire sprinkler or standpipe system.\u003c\/p\u003e\u003ch3\u003eKit features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eThree-piece kit\u003c\/b\u003e: One open snoot, one 2-1\/2-inch IPS brass wall plate marked AUTOSPRINKLER, and one plug with chain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRegional connection\u003c\/b\u003e: The Tempe hose-thread configuration must match the responding fire service and mating equipment; do not assume NST interchangeability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePart identification\u003c\/b\u003e: FPPI 09-660, supplier manufacturer part 4380004430.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical reference\u003c\/h3\u003e\u003ctable\u003e \u003ctr\u003e \u003ctd\u003e\u003cb\u003eManufacturer \/ Brand\u003c\/b\u003e\u003c\/td\u003e \u003ctd\u003eFire Protection Products Inc\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cb\u003eModel \/ Series Number \/ SIN\u003c\/b\u003e\u003c\/td\u003e \u003ctd\u003e09-660; supplier manufacturer part 4380004430\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cb\u003eConnection \/ Thread Size \u0026amp; Type\u003c\/b\u003e\u003c\/td\u003e \u003ctd\u003e2-1\/2-inch regional Tempe hose-thread configuration; verify both mating connections\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cb\u003eMaterial \/ Body Construction\u003c\/b\u003e\u003c\/td\u003e \u003ctd\u003eBrass wall plate; three-piece open-snoot kit\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cb\u003eKit contents\u003c\/b\u003e\u003c\/td\u003e \u003ctd\u003eOpen snoot, 2-1\/2-inch IPS AUTOSPRINKLER wall plate, and plug with chain\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cb\u003eInstallation requirements\u003c\/b\u003e\u003c\/td\u003e \u003ctd\u003eMatch the regional thread and follow the project, manufacturer and AHJ requirements\u003c\/td\u003e \u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003eConfirm the full connection arrangement, supplied components and project requirements before ordering. Follow the manufacturer installation instructions and required AHJ review; this accessory kit does not by itself establish system compliance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExact product reference:\u003c\/strong\u003e \u003ca href=\"https:\/\/www.supplynet.com\/catalogsearch\/result\/?q=09-660\"\u003eSupplyNet FPPI 09-660 Tempe assembly listing\u003c\/a\u003e\u003c\/p\u003e","brand":"Fire Protection Products Inc","offers":[{"title":"Default Title","offer_id":46202837893368,"sku":"09-660","price":109.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/7183\/3336\/files\/2-12-fdc-tempe-with-pp-3pc-kit-for-fire-protection-5849597.png?v=1776004378"},{"product_id":"fppi-09-658-phoenix-open-snoot-fdc-assembly-kit-2-1-2-inch","title":"FPPI 09-658 Phoenix Open-Snoot FDC Assembly Kit, 2-1\/2 Inch","description":"\u003cp\u003eThe FPPI 09-658 is a 2-1\/2-inch Phoenix-thread open-snoot assembly kit for a compatible fire department connection installation. It includes the connection accessory components rather than an entire sprinkler or standpipe system.\u003c\/p\u003e\u003ch3\u003eKit features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eThree-piece kit\u003c\/b\u003e: One open snoot, one 2-1\/2-inch IPS brass wall plate marked AUTOSPRINKLER, and one plug with chain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRegional connection\u003c\/b\u003e: The Phoenix hose-thread configuration must match the responding fire service and mating equipment; do not assume NST interchangeability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePart identification\u003c\/b\u003e: FPPI 09-658, supplier manufacturer part 4380004420.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical reference\u003c\/h3\u003e\u003ctable\u003e \u003ctr\u003e \u003ctd\u003e\u003cb\u003eManufacturer \/ Brand\u003c\/b\u003e\u003c\/td\u003e \u003ctd\u003eFire Protection Products Inc\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cb\u003eModel \/ Series Number \/ SIN\u003c\/b\u003e\u003c\/td\u003e \u003ctd\u003e09-658; supplier manufacturer part 4380004420\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cb\u003eConnection \/ Thread Size \u0026amp; Type\u003c\/b\u003e\u003c\/td\u003e \u003ctd\u003e2-1\/2-inch regional Phoenix hose-thread configuration; verify both mating connections\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cb\u003eMaterial \/ Body Construction\u003c\/b\u003e\u003c\/td\u003e \u003ctd\u003eCast-brass open snoot and brass wall plate\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cb\u003eKit contents\u003c\/b\u003e\u003c\/td\u003e \u003ctd\u003eOpen snoot, 2-1\/2-inch IPS AUTOSPRINKLER wall plate, and plug with chain\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cb\u003eInstallation requirements\u003c\/b\u003e\u003c\/td\u003e \u003ctd\u003eMatch the regional thread and follow the project, manufacturer and AHJ requirements\u003c\/td\u003e \u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003eConfirm the full connection arrangement, supplied components and project requirements before ordering. Follow the manufacturer installation instructions and required AHJ review; this accessory kit does not by itself establish system compliance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExact product reference:\u003c\/strong\u003e \u003ca href=\"https:\/\/www.supplynet.com\/catalogsearch\/result\/?q=09-658\"\u003eSupplyNet FPPI 09-658 Phoenix assembly listing\u003c\/a\u003e\u003c\/p\u003e","brand":"Fire Protection Products Inc","offers":[{"title":"Default Title","offer_id":46202837991672,"sku":"09-658","price":109.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/7183\/3336\/files\/2-12-open-snoot-phoenix-assembly-for-fire-protection-1739115.png?v=1776004378"},{"product_id":"2-1-2-nst-plug-and-chain-for-fire-protection-equipment","title":"2-1\/2\" NST Plug and Chain for Fire Protection Equipment","description":"\u003cp\u003eThe FPPI Figure 07-450 brass plug and chain protects the female swivel of a fire department connection or hydrant from debris. This listing is for the 2½-inch male NST configuration.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial\u003c\/b\u003e: B124 brass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eConnection\u003c\/b\u003e: 2½-inch MNST; confirm the mating swivel thread before ordering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRetention\u003c\/b\u003e: Brass chain and S-type attachment hook.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHandling\u003c\/b\u003e: Pin-lug design for use with fire-service pin-lug hydrant wrenches.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInstallation orientation\u003c\/b\u003e: Horizontal only, as specified by the manufacturer.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBefore installation, confirm that the female swivel has its required gasket for a watertight seal. The manufacturer specifies tightening with two pin-lug hydrant wrenches and reports testing to a maximum working pressure of 300 psi. A protective plug is not a substitute for the connection’s required valves or maintenance.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.asc-es.com\/resource\/07-450%20FPPI%20Brass%20Plugs%20Submittal\"\u003eFPPI brass plug and chain specifications, April 2022\u003c\/a\u003e\u003c\/p\u003e","brand":"Fire Protection Products Inc","offers":[{"title":"Default Title","offer_id":46202838876408,"sku":"07-450","price":54.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/7183\/3336\/files\/2-12-nst-plug-and-chain-for-fire-protection-equipment-1074517.png?v=1776004381"},{"product_id":"4-x-8-metal-wall-plate-fdc-sign-for-fire-safety","title":"4\" X 8\" Metal Wall Plate FDC Sign for Fire Safety","description":"\u003cp\u003eThe FPPI 09-509 FDC identification sign is a 4 × 8-inch aluminum wall sign with the inscription FIRE DEPT CONN. The manufacturer’s Figure 09-507 table identifies the complete item number as 09-509-00.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003ePurpose\u003c\/b\u003e: Identification of a fire department connection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSize\u003c\/b\u003e: 4 × 8 inches.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial\u003c\/b\u003e: Aluminum.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFinish\u003c\/b\u003e: Red, as described for the manufacturer’s aluminum signs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting\u003c\/b\u003e: Direct wall mounting rather than a round plate fitted around a pipe.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eConfirm the inscription and placement required for the installation before ordering. The sign alone does not establish compliance of the connection, its location, or the complete fire protection system.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.asc-es.com\/resource\/09-507%20FPPI%20FDC%20Wall%20Plates%20Submittal\"\u003eFPPI FDC wall plate and identification sign specifications, including item 09-509-00, May 2022\u003c\/a\u003e\u003c\/p\u003e","brand":"Fire Protection Products Inc","offers":[{"title":"Default Title","offer_id":46202839040248,"sku":"09-509","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/7183\/3336\/files\/4-x-8-metal-wall-plate-fdc-sign-474089.png?v=1776004381"},{"product_id":"2-1-2-bronze-hose-gave-valve-for-fire-protection","title":"2-1\/2\" Bronze Hose Gave Valve for Fire Protection","description":"\u003cdiv\u003e\u003cdiv\u003e\n\u003cp\u003eThe Nibco Inc. 2-1\/2\" bronze hose gate valve provides direct command over water flow within commercial and residential fire protection systems. This component integrates into fire safety assemblies to manage water distribution when critical situations arise, satisfying standard system requirements for manual flow isolation and control.\u003c\/p\u003e\n\u003cp\u003eEngineered to meet rigorous facility life safety demands, this valve ensures reliable performance and effective pressure management. Per standard installation guidelines under NFPA 13 and NFPA 25 frameworks, water control components must be fully accessible, correctly sized, and periodically inspected to verify operational integrity.\u003c\/p\u003e \u003ch2\u003eKey Features \u0026amp; Construction\u003c\/h2\u003e\n\u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eHigh-Grade Bronze Construction:\u003c\/strong\u003e Utilizes durable, wear- and corrosion-resistant bronze to stand up to continuous system pressure over time.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003ePrecision Sizing:\u003c\/strong\u003e Features a 2-1\/2 inch dimension built to integrate seamlessly with standard commercial and residential fire suppression piping and hose connections.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eHigh-Visibility Control:\u003c\/strong\u003e Equipped with a bright red handwheel on top for rapid identification and immediate manual actuation during an emergency.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eJob Site Efficiency:\u003c\/strong\u003e Engineered for a hassle-free setup that saves valuable installation time for trade contractors.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch2\u003eTechnical Specifications \u0026amp; Compliance Table\u003c\/h2\u003e\n\u003ctable\u003e \u003cthead\u003e \u003ctr\u003e \u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e \u003cth\u003e\u003cstrong\u003eDetail\u003c\/strong\u003e\u003c\/th\u003e \u003c\/tr\u003e \u003c\/thead\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eManufacturer \/ Brand\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003eNibco Inc.\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eModel \/ Series Number \/ SIN\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003e2-1\/2\" Hose Gate Valve\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eConnection \/ Thread Size \u0026amp; Type\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003e2-1\/2 Inch\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eMaterial \/ Body Construction\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003eHigh-Grade Bronze\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eApplicable NFPA Standards\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003eNFPA 13, NFPA 25\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\n\u003c\/table\u003e \u003ch2\u003eSubmittal \u0026amp; Installation Note\u003c\/h2\u003e\n\u003cp\u003eVerify all local Authority Having Jurisdiction (AHJ) requirements, system pressure parameters, and listing compatibilities prior to installation. Always consult the manufacturer's technical data sheets and engineering instructions for proper torque limits and mounting procedures.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/div\u003e","brand":"Nibco Inc.","offers":[{"title":"Default Title","offer_id":46202847002872,"sku":"T-103-HC","price":1422.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/7183\/3336\/files\/2-12-bronze-hose-gave-valve-for-fire-protection-1174073.webp?v=1776010341"},{"product_id":"5-storz-cap-for-fire-protection-equipment","title":"5\" Storz Cap for Fire Protection Equipment","description":"\u003cdiv\u003e\n\u003cp\u003eProtect your 5-inch Storz fire protection connections with a blind cap built for heavy-duty commercial environments. This component secures directly to Storz fire department connections, pumper inlets, or hose assemblies, maintaining a reliable seal that keeps internal waterways clear of foreign obstruction.\u003c\/p\u003e \u003cp\u003eIn accordance with standard facility maintenance and life safety practices under NFPA 25, sealing vulnerable inlets prevents debris, environmental contaminants, and nesting insects from compromising emergency water delivery. This cap maintains system readiness across wet pipe, dry pipe, and fire department connection (FDC) assemblies.\u003c\/p\u003e \u003ch2\u003eKey Features \u0026amp; Construction\u003c\/h2\u003e\n\u003cul\u003e \u003cli\u003e\n\u003cb\u003eForged Aluminum Body:\u003c\/b\u003e Provides high-strength structural integrity while maintaining lightweight handling on the job site.\u003c\/li\u003e \u003cli\u003e\n\u003cb\u003ePowder Coat Finish:\u003c\/b\u003e Resists harsh weather elements, corrosion, and job site wear.\u003c\/li\u003e \u003cli\u003e\n\u003cb\u003eSecure Retention Assembly:\u003c\/b\u003e Includes an attached wire and chain to anchor the cap to the connection, preventing accidental loss during operation.\u003c\/li\u003e \u003cli\u003e\n\u003cb\u003eDebris Defense:\u003c\/b\u003e Seals 5-inch Storz connections to block dirt, rocks, and moisture from entering fire protection piping.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch2\u003eTechnical Specifications \u0026amp; Compliance Table\u003c\/h2\u003e\n\u003ctable\u003e \u003ctr\u003e \u003cth\u003e\u003cb\u003eParameter\u003c\/b\u003e\u003c\/th\u003e \u003cth\u003e\u003cb\u003eSpecification\u003c\/b\u003e\u003c\/th\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cb\u003eManufacturer \/ Brand\u003c\/b\u003e\u003c\/td\u003e \u003ctd\u003eGuardian Fire Equipment\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cb\u003eModel \/ Series Number \/ SIN\u003c\/b\u003e\u003c\/td\u003e \u003ctd\u003e5\" Storz Cap\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cb\u003eConnection \/ Thread Size \u0026amp; Type\u003c\/b\u003e\u003c\/td\u003e \u003ctd\u003e5\" Storz (Blind Cap)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cb\u003eMaterial \/ Body Construction\u003c\/b\u003e\u003c\/td\u003e \u003ctd\u003eForged Aluminum with Powder Coat Finish\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cb\u003eApplicable NFPA Standards\u003c\/b\u003e\u003c\/td\u003e \u003ctd\u003eNFPA 25\u003c\/td\u003e \u003c\/tr\u003e\n\u003c\/table\u003e \u003cp\u003eAlways verify local Authority Having Jurisdiction (AHJ) requirements and cross-reference system design criteria before installing fire protection components.\u003c\/p\u003e \u003c\/div\u003e","brand":"Guardian Fire Equipment","offers":[{"title":"Default Title","offer_id":46307950952696,"sku":"6645","price":341.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/7183\/3336\/files\/5StorzCapforFireProtectionEquipment_2.jpg?v=1787846440"},{"product_id":"premium-angle-hose-valve-for-fire-safety-applications","title":"Premium Angle Hose Valve for Fire Safety Applications","description":"\u003cdiv\u003e\n\u003cp\u003eThe Viking Premium Angle Hose Valve is a purpose-built component designed for integration into wet, dry, pre-action, and deluge fire protection sprinkler systems. It provides reliable flow control and acts as a direct connection point for standard firefighting equipment. Operating the valve manually is straightforward during emergency response or maintenance, utilizing a clearly visible red wheel handle for positive control.\u003c\/p\u003e\n\u003cp\u003eThis valve fulfills essential life safety code requirements, fully meeting NFPA standards to support compliance during local and national building inspections. It holds both UL Listings and FM Approvals, satisfying recognized quality and safety mandates across the commercial fire protection industry.\u003c\/p\u003e\n\u003ch2\u003eKey Features \u0026amp; Construction\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDull Construction:\u003c\/strong\u003e Crafted from high-grade ductile iron to deliver superior strength and corrosion resistance in harsh operational environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Compatibility:\u003c\/strong\u003e Engineered for seamless integration across wet, dry, pre-action, and deluge fire sprinkler setups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Connection:\u003c\/strong\u003e Built to fit common fire hose interfaces, ensuring interoperability with existing equipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManual Actuation:\u003c\/strong\u003e Equipped with a high-visibility red wheel handle for fast, manual flow control during testing or emergency response.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustry Approvals:\u003c\/strong\u003e UL Listed and FM Approved to satisfy strict commercial compliance regulations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications \u0026amp; Compliance Table\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eManufacturer \/ Brand\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eViking (Distributed by Fire Protection Products Inc)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eModel \/ Series Number \/ SIN\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePremium Angle Hose Valve\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConnection \/ Thread Size \u0026amp; Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMultiple options available (including 1-1\/2\" and 2-1\/2\" FNPT, MNST, Grooved, and specialized municipal threads per specific tags)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial \/ Body Construction\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHigh-grade brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAgency Listings \u0026amp; Approvals\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUL Listed, FM Approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eApplicable NFPA Standards\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNFPA compliant for fire sprinkler and standpipe system integration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eSubmittal \u0026amp; Installation Note:\u003c\/strong\u003e Contractors and facility managers must verify all local Authority Having Jurisdiction (AHJ) requirements and consult the manufacturer's technical documentation prior to system installation or retrofit.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Fire Protection Products Inc","offers":[{"title":"1-1\/2 in. \/ FNPT X FNPT","offer_id":46372472193272,"sku":"07-024","price":100.99,"currency_code":"USD","in_stock":true},{"title":"1-1\/2 in. \/ FNPT X MNST","offer_id":46372472291576,"sku":"07-022","price":88.99,"currency_code":"USD","in_stock":true},{"title":"2-1\/2 in. \/ FNPT X MCF","offer_id":46372472553720,"sku":"07-016","price":163.99,"currency_code":"USD","in_stock":true},{"title":"2-1\/2 in. \/ FNPT X MCLV","offer_id":46372472586488,"sku":"07-012","price":163.99,"currency_code":"USD","in_stock":true},{"title":"2-1\/2 in. \/ FNPT X MNST","offer_id":46372472619256,"sku":"07-000","price":158.99,"currency_code":"USD","in_stock":true},{"title":"2-1\/2 in. \/ FNPT X MNYFD","offer_id":46372472652024,"sku":"07-003","price":205.99,"currency_code":"USD","in_stock":true},{"title":"2-1\/2 in. \/ FNPT X MPHX","offer_id":46372472684792,"sku":"07-008","price":163.99,"currency_code":"USD","in_stock":true},{"title":"2-1\/2 in. \/ FNPT X MTEM","offer_id":46372472717560,"sku":"07-010","price":169.99,"currency_code":"USD","in_stock":true},{"title":"2-1\/2 in. \/ GRV X FNPT","offer_id":46372472750328,"sku":"07-021","price":207.99,"currency_code":"USD","in_stock":true},{"title":"2-1\/2 in. \/ GRV X MNST","offer_id":46372472783096,"sku":"07-001","price":178.99,"currency_code":"USD","in_stock":true},{"title":"2-1\/2 in. \/ GRV X MNYFD","offer_id":46372472815864,"sku":"07-001-03","price":207.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/7183\/3336\/files\/angle-hose-valve-746716.png?v=1776005719"},{"product_id":"fh120-rapid-installation-bracket-for-sprinkler-system","title":"FH120 Rapid Installation Bracket for Sprinkler System","description":"\u003cp\u003eThe FlexHead FH120 Rapid Installation Bracket supports flexible sprinkler-hose drops in compatible suspended-ceiling and framed gypsum or drywall applications. This listing offers 24-inch and 48-inch bracket options.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial\u003c\/b\u003e: Galvanized carbon steel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHub\u003c\/b\u003e: Open design with adjustable positioning along the bracket.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLegs\u003c\/b\u003e: Adjustable clamping-leg positions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eT-bar attachment\u003c\/b\u003e: Clamping design allows attachment without power tools; other installation steps still require the specified tools and fasteners.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eApplications\u003c\/b\u003e: Suspended ceilings and the wood- or steel-framing arrangements shown in the manufacturer’s instructions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eUse the hose compatibility table for the selected bracket length. The published table distinguishes 24-inch and 48-inch approval combinations, so do not assume both sizes carry identical listings with every hose. Follow the hub locking, tightening, and framing requirements in the complete installation instructions.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.asc-es.com\/resource\/FH120%20Rapid%20Installation%20Bracket%20Submittal\"\u003eFlexHead FH120 specifications, compatibility table, and installation instructions, August 2024 revision\u003c\/a\u003e\u003c\/p\u003e","brand":"FlexHead","offers":[{"title":"24 in.","offer_id":46378173563128,"sku":"FH120-24","price":20.99,"currency_code":"USD","in_stock":true},{"title":"48 in.","offer_id":46378173595896,"sku":"FH120-48","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/7183\/3336\/files\/fh120-rapid-installation-bracket-357414.jpg?v=1775620550"},{"product_id":"ips-cast-iron-galvanized-wall-plates-for-fire-protection","title":"Ips Cast Iron Galvanized Wall Plates For Fire Protection","description":"\u003cdiv\u003e\n\u003cp\u003eIPS Cast Iron Galvanized Wall Plates provide essential durability, structural support, and environmental protection for fire protection piping systems and wall-mounted infrastructure. Designed specifically for commercial contractors and facility managers, these heavy-duty components integrate seamlessly into fire sprinkler and standpipe layouts to secure piping penetrations and maintain overall assembly stability under stress.\u003c\/p\u003e \u003cp\u003eTo satisfy the rigorous safety requirements dictated by \u003cstrong\u003eNFPA 13\u003c\/strong\u003e and \u003cstrong\u003eNFPA 25\u003c\/strong\u003e for the installation, inspection, and maintenance of fire sprinkler systems, these wall plates act as reliable protective barriers. They preserve the integrity of critical piping near walls, helping prevent mechanical degradation, environmental wear, and structural compromise across diverse commercial and industrial building types.\u003c\/p\u003e \u003ch2\u003eKey Features \u0026amp; Construction\u003c\/h2\u003e\n\u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eCast Iron Strength:\u003c\/strong\u003e Crafted from premium cast iron to deliver exceptional structural support and robust protection for fire protection components.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eGalvanized Finish:\u003c\/strong\u003e Features a protective galvanized coating that offers superior corrosion resistance against rust and environmental wear for indoor and outdoor installations.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003ePrecision Engineering:\u003c\/strong\u003e Engineered for a seamless fit that integrates smoothly with standard fire sprinkler piping layouts to enhance overall system stability.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eMaintenance Reduction:\u003c\/strong\u003e The durable, corrosion-resistant surface profile minimizes long-term maintenance overhead for facility managers.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch2\u003eTechnical Specifications \u0026amp; Compliance Table\u003c\/h2\u003e\n\u003ctable\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eManufacturer \/ Brand\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003eFire Protection Products Inc\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eModel \/ Series Number \/ SIN\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003eIPS Cast Iron Galvanized Wall Plates\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eConnection \/ Thread Size \u0026amp; Type\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003e1\", 1-1\/4\", 1-1\/2\", 2\", 2-1\/2\", 3\", 4\" IPS\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eMaterial \/ Body Construction\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003eCast Iron with Galvanized Coating\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eApplicable NFPA Standards\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003eNFPA 13, NFPA 25\u003c\/td\u003e \u003c\/tr\u003e\n\u003c\/table\u003e \u003cp\u003eContractors must verify local Authority Having Jurisdiction (AHJ) requirements and consult manufacturer technical data sheets prior to beginning system installation or layout design.\u003c\/p\u003e \u003c\/div\u003e","brand":"Fire Protection Products Inc","offers":[{"title":"1 in.","offer_id":46378173628664,"sku":"01-300","price":10.99,"currency_code":"USD","in_stock":true},{"title":"1-1\/4 in.","offer_id":46378173661432,"sku":"01-301","price":11.99,"currency_code":"USD","in_stock":true},{"title":"1-1\/2 in.","offer_id":46378173694200,"sku":"01-302","price":11.99,"currency_code":"USD","in_stock":true},{"title":"2 in.","offer_id":46378173726968,"sku":"01-303","price":15.99,"currency_code":"USD","in_stock":true},{"title":"2-1\/2 in.","offer_id":46378173759736,"sku":"01-304","price":21.99,"currency_code":"USD","in_stock":true},{"title":"3 in.","offer_id":46378173792504,"sku":"01-305","price":21.99,"currency_code":"USD","in_stock":true},{"title":"4 in.","offer_id":46378173825272,"sku":"01-306","price":25.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/7183\/3336\/files\/ips-cast-iron-galvanized-wall-plates-357251.png?v=1776006446"},{"product_id":"ball-drip-for-fire-department-connection-moisture-control","title":"Ball Drip for Fire Department Connection Moisture Control","description":"\u003cp\u003eThe FPPI brass ball drip valve drains moisture from piping such as the dry side of a fire department connection check valve. In the correct horizontal position, gravity lets the internal ball move away from its seat for drainage. System pressure moves the ball onto the seat, and the ball returns when pressure is removed.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003ePattern\u003c\/b\u003e: Straight.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBody\u003c\/b\u003e: C3604 brass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBall\u003c\/b\u003e: Type 304 stainless steel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFinish\u003c\/b\u003e: Rough brass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSize choices\u003c\/b\u003e: ½-inch and ¾-inch options in this listing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrientation\u003c\/b\u003e: Horizontal only.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOperating limitation:\u003c\/strong\u003e The valve opens by gravity only. Do not use it with more than a 1-foot column of water acting on the ball check. Arrange the discharge piping for proper drainage and do not overtighten the threaded connection.\u003c\/p\u003e\u003cp\u003eContains lead. Not for use in water systems intended for human consumption. Correct drainage depends on the complete piping arrangement; this valve alone does not guarantee protection against freezing or corrosion.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.asc-es.com\/resource\/08-540%20FPPI%20Brass%20Ball%20Drip%20Valve%20Submittal\"\u003eFPPI brass ball drip valve specifications and installation limitations, April 2025\u003c\/a\u003e\u003c\/p\u003e","brand":"Fire Protection Products Inc","offers":[{"title":"1\/2 in.","offer_id":46378173890808,"sku":"08-540","price":13.99,"currency_code":"USD","in_stock":true},{"title":"3\/4 in.","offer_id":46378173923576,"sku":"08-541","price":20.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/7183\/3336\/files\/ball-drip-629131.png?v=1776006507"},{"product_id":"2-5-standard-pipe-hose-valve-astm-a536-ductile-iron","title":"2.5\" Standard Pipe Hose Valve ASTM A536 Ductile Iron","description":"\u003cp\u003eZurn Wilkins ZW4000G-T is the 2-1\/2-inch Pressure-Tru pressure-reducing hose-valve configuration identified by the supplier’s T-BT designation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eConnections\u003c\/b\u003e: The supplier describes a grooved inlet and male hose-thread outlet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSetting format\u003c\/b\u003e: The family description identifies factory-set operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExact identification\u003c\/b\u003e: Supplier and vendor references are both ZW4000G-T.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe complete suffix helps distinguish this configuration from the separately cataloged U variant. Confirm mounting details, hose-thread standard, factory setting and installed service conditions using the manufacturer instructions; the record does not verify a ductile-iron body.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eRetained table clarification\u003c\/b\u003e: The legacy table below is preserved for reference. Broader material, performance, compatibility and approval claims in it are not verified by the exact supplier record and must not be treated as confirmed specifications; use the verified details above and current manufacturer documentation.\u003c\/p\u003e\u003ctable\u003e \u003cthead\u003e \u003ctr\u003e \u003cth\u003e\u003cstrong\u003eTechnical Specification\u003c\/strong\u003e\u003c\/th\u003e \u003cth\u003e\u003cstrong\u003eDetail\u003c\/strong\u003e\u003c\/th\u003e \u003c\/tr\u003e \u003c\/thead\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eManufacturer \/ Brand\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003eZurn Wilkins\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eModel \/ Series Number\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003e2.5\" Standard Pipe Hose Valve\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eConnection \/ Thread Size \u0026amp; Type\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003e2.5\" Grooved Inlet (AWWA C606) \/ Male Hose Thread (NRS)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eMaterial \/ Body Construction\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003eASTM A536 Ductile Iron\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eAgency Listings \u0026amp; Approvals\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003eUL 262 Listed, FM Approved\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eApplicable NFPA Standards\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003eNFPA 13, NFPA 14, NFPA 25\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003ca href=\"https:\/\/vsncatalog.supplynet.com\/configure\/ZW4000G-T\"\u003eSupplyNet exact ZW4000G-T item reference\u003c\/a\u003e\u003c\/p\u003e","brand":"Zurn Wilkins","offers":[{"title":"Default Title","offer_id":46372713562360,"sku":"ZW4000G-T","price":711.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/7183\/3336\/files\/2.5StandardPipeHoseValveASTMA536DuctileIron_1.jpg?v=1792233971"},{"product_id":"2-standard-pipe-hose-valve-with-u-bolt-above-ground","title":"2\" Standard Pipe Hose Valve with U Bolt Above Ground","description":"\u003cdiv\u003e\n\u003cp\u003e\nThe 2\" Standard Pipe Hose Valve with U Bolt Above Ground from Viking is a robust and precision-crafted valve designed specifically for fire protection professionals. Ideal for above-ground fire suppression systems, it ensures dependable water control for commercial, municipal, and industrial fire safety applications.\n\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eDurable Construction\u003c\/b\u003e: Made from high-strength iron alloy, this valve is built to resist corrosion and mechanical wear, ideal for exposed environments in fire protection systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eConnection Standards\u003c\/b\u003e: Equipped with a grooved inlet compliant with AWWA C606 and a male hose thread meeting NFPA standards, allowing secure and standardized connections to sprinkler piping and fire hoses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCertified Safety\u003c\/b\u003e: UL Listed and FM Approved for strict fire safety compliance, offering reliable operation when every second counts in emergencies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFactory-Calibrated Pressure Rating\u003c\/b\u003e: Pre-set to deliver consistent water flow, this valve reduces installation errors and minimizes ongoing maintenance requirements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSystem Compatibility\u003c\/b\u003e: Designed for Class I and Class III standpipe systems, addressing common pressure demands and hose connection standards across varied fire protection setups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInstallation Efficiency\u003c\/b\u003e: Features a grooved connection and U bolt design for fast, secure above-ground mounting, decreasing potential leak points and installation time.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\nThis valve safeguards against water flow interruptions and system inefficiencies, critical for effective fire suppression. By integrating corrosion-resistant materials with certified safety approvals, it not only enhances the reliability of fire protection infrastructure but also streamlines inspections and maintenance. Perfect for new builds or retrofitting, it supports durable fire safety installations that meet current regulatory demands and foster firefighter confidence during critical interventions.\n\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Zurn Wilkins","offers":[{"title":"Default Title","offer_id":46372713595128,"sku":"ZW4000G-U","price":711.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/7183\/3336\/files\/2-standard-pipe-hose-valve-above-ground-u-bolt-8313142-2-standard-pipe-hose-valve-with-u-bolt-above.jpg?v=1792233930"},{"product_id":"4-x-4-storz-assembly-30-degree-fnpt-fire-equipment","title":"FPPI 30-Degree Storz Assemblies with Cap, 4-Inch FNPT","description":"\u003cp\u003eFPPI 30-degree Storz elbow assemblies with body and cap, for connection of large-diameter fire-service hose to fire sprinkler or standpipe systems. Both choices have a 4-inch FNPT piping connection. Select the Storz connection size required.\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eStorz connection\u003c\/th\u003e\n\u003cth\u003eFNPT connection\u003c\/th\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e4 inch\u003c\/td\u003e\n\u003ctd\u003e4 inch\u003c\/td\u003e\n\u003ctd\u003e09-215-00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e5 inch\u003c\/td\u003e\n\u003ctd\u003e4 inch\u003c\/td\u003e\n\u003ctd\u003e09-217-00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eOriginal 4-inch Storz part reference\u003c\/h3\u003e\u003cp\u003eThe retained specifications below apply to part 09-215-00. For the 5-inch Storz configuration, select part 09-217-00 above.\u003c\/p\u003e\u003cdiv\u003e\n\u003cp\u003eThe FPPI 4\" x 4\" Storz Assembly with a 30-degree FNPT elbow is engineered for commercial and industrial fire protection systems requiring reliable, large-diameter hose connections. It installs directly into fire sprinkler and standpipe systems to facilitate secure, leak-resistant water delivery during emergency responses. The 30-degree angled design improves hose maneuverability, optimizes water flow, and reduces dangerous kinks in complex suppression setups.\u003c\/p\u003e \u003cp\u003eThis assembly complies with rigorous industry testing requirements and conforms to NFPA standards for fire protection safety. It satisfies essential code mandates for commercial and industrial facilities, ensuring rapid deployment and dependable operation when integrated into approved life safety systems.\u003c\/p\u003e \u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eCorrosion-Resistant Build:\u003c\/strong\u003e Constructed from robust materials to withstand harsh firefighting environments and deliver an extended service life.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003e30-Degree Elbow:\u003c\/strong\u003e Facilitates efficient hose routing and improves flow dynamics by preventing kinks in tight equipment setups.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eStorz Compatibility:\u003c\/strong\u003e Designed specifically for 4-inch diameter Storz hose connections used in standpipe and sprinkler networks.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eLightweight Design:\u003c\/strong\u003e Weighs approximately 7.21 lbs to support quick deployment and handling during critical emergency responses.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ctable\u003e \u003cthead\u003e \u003ctr\u003e \u003cth\u003e\u003cstrong\u003eTechnical Specification\u003c\/strong\u003e\u003c\/th\u003e \u003cth\u003e\u003cstrong\u003eDetails\u003c\/strong\u003e\u003c\/th\u003e \u003c\/tr\u003e \u003c\/thead\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eManufacturer \/ Brand\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003eFire Protection Products Inc (FPPI)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eModel \/ Series Number \/ SIN\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003e4\" x 4\" Storz Assembly 30 Degree FNPT\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eConnection \/ Thread Size \u0026amp; Type\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003e4\" Storz x 4\" FNPT (30-Degree Elbow)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eMaterial \/ Body Construction\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003eCorrosion-resistant metal alloy\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eAgency Listings \u0026amp; Approvals\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003eUL Listed\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eApplicable NFPA Standards\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003eConforms to NFPA standards for fire protection safety\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\n\u003c\/table\u003e \u003cp\u003eAlways verify local Authority Having Jurisdiction (AHJ) requirements and consult manufacturer technical cut sheets prior to beginning installation.\u003c\/p\u003e \u003c\/div\u003e","brand":"Fire Protection Products Inc","offers":[{"title":"4 inch","offer_id":46372721361144,"sku":"09-215-00","price":413.99,"currency_code":"USD","in_stock":true},{"title":"5 inch","offer_id":68096784007416,"sku":"09-217-00","price":582.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/7183\/3336\/files\/4-x-4-storz-assembly-30-degree-fnpt-fire-equipment-4033492.jpg?v=1775620893"},{"product_id":"5-x-4-storz-assembly-straight-female-npt-connection","title":"5\" X 4\" Storz Assembly Straight Female NPT Connection","description":"\u003cp\u003eFPPI 09-207-00 is a straight 5-inch by 4-inch Storz assembly for fire-service hose connections to sprinkler or standpipe systems. The supplier describes the assembly as a body and cap.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eConnection\u003c\/b\u003e: 5-inch Storz by 4-inch female NPT, straight pattern.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eIncluded assembly\u003c\/b\u003e: Body and cap.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCross-reference\u003c\/b\u003e: FPPI vendor part 4380001922.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eMatch both connection interfaces to the specified fire-department equipment. The supplier catalogs this version as UL; confirm its current listing and installation details before submittal.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eLegacy table clarification\u003c\/b\u003e: The retained table’s FM approval, generic material and blanket NFPA-compliance statements are not verified by the exact supplier record. FPPI is the identified manufacturer, not Viking.\u003c\/p\u003e\u003ctable style=\"width:100%; border-collapse: collapse;\"\u003e \u003cthead\u003e \u003ctr style=\"background-color: #f2f2f2;\"\u003e \u003cth style=\"border: 1px solid #ddd; padding: 8px; text-align: left;\"\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e \u003cth style=\"border: 1px solid #ddd; padding: 8px; text-align: left;\"\u003e\u003cstrong\u003eDetail\u003c\/strong\u003e\u003c\/th\u003e \u003c\/tr\u003e \u003c\/thead\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eManufacturer \/ Brand\u003c\/strong\u003e\u003c\/td\u003e \u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eFire Protection Products Inc (Viking)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr style=\"background-color: #f9f9f9;\"\u003e \u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eModel \/ Series Number \/ SIN\u003c\/strong\u003e\u003c\/td\u003e \u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e5\" x 4\" Storz Assembly Straight Female NPT Connection\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eConnection \/ Thread Size \u0026amp; Type\u003c\/strong\u003e\u003c\/td\u003e \u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e5\" Storz x 4\" Straight Female NPT\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eMaterial \/ Body Construction\u003c\/strong\u003e\u003c\/td\u003e \u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eRobust, durable fire-service metal construction\u003c\/td\u003e \u003c\/tr\u003e \u003ctr style=\"background-color: #f9f9f9;\"\u003e \u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eAgency Listings \u0026amp; Approvals\u003c\/strong\u003e\u003c\/td\u003e \u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eUL Listed, FM Approved\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eApplicable NFPA Standards\u003c\/strong\u003e\u003c\/td\u003e \u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eNFPA compliant for fire protection systems\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003ca href=\"https:\/\/vsncatalog.supplynet.com\/configure\/09-207-00\"\u003eSupplier product information for 09-207-00\u003c\/a\u003e\u003c\/p\u003e","brand":"Fire Protection Products Inc","offers":[{"title":"Default Title","offer_id":46372721393912,"sku":"09-207-00","price":468.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/7183\/3336\/files\/5-x-4-storz-assembly-straight-female-npt-connection-2612672.jpg?v=1775620894"},{"product_id":"storz-cap-4-with-weep-hole-for-fire-protection-systems","title":"Storz Cap 4\" With Weep Hole For Fire Protection Systems","description":"\u003cp\u003eThe FPPI 4-inch Storz cap with weep hole is a cap-only replacement for a matching Storz connection. SupplyNet identifies this item as STORZ-CAP4, manufacturer part 4380002260; it is not a complete fire department connection body-and-cap assembly.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eConnection size\u003c\/b\u003e: 4-inch Storz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWeep-hole design\u003c\/b\u003e: FPPI states that the UL Listed caps have a weep hole to mitigate the risk of unintended system pressurization.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eConfiguration\u003c\/b\u003e: Cap only, rather than the straight or elbow body-and-cap assemblies listed separately in the manufacturer sheet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eManufacturer reference\u003c\/b\u003e: FPPI Storz Connections submittal, Figures 09-200 and 09-230, revision dated June 26, 2024.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eMatch the Storz connection size and required cap configuration before ordering. Do not substitute this weep-hole cap for a test cap or treat it as a pressure-tight closure. Refer to the manufacturer instructions for the applicable connection and system.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eLegacy table clarification\u003c\/b\u003e: The existing tables below are retained unchanged. The referenced manufacturer sheet identifies UL Listed weep-hole caps, but does not establish the tables’ FM Approved claim or blanket NFPA-compliance wording. Their generic material descriptions and weight entries are not newly verified material or shipping specifications.\u003c\/p\u003e\u003ctable class=\"data table additional-attributes\" id=\"product-attribute-specs-table\"\u003e \u003ccaption class=\"table-caption\"\u003eTechnical Specifications \u0026amp; Compliance\u003c\/caption\u003e \u003ctbody\u003e \u003ctr\u003e \u003cth class=\"col label\" scope=\"row\"\u003e\u003cstrong\u003eManufacturer \/ Brand\u003c\/strong\u003e\u003c\/th\u003e \u003ctd class=\"col data\"\u003eFire Protection Products Inc (Viking)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth class=\"col label\" scope=\"row\"\u003e\u003cstrong\u003eModel \/ Series Number \/ SIN\u003c\/strong\u003e\u003c\/th\u003e \u003ctd class=\"col data\"\u003eSTORZ-CAP4\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth class=\"col label\" scope=\"row\"\u003e\u003cstrong\u003eConnection \/ Thread Size \u0026amp; Type\u003c\/strong\u003e\u003c\/th\u003e \u003ctd class=\"col data\"\u003e4\" Storz Connection\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth class=\"col label\" scope=\"row\"\u003e\u003cstrong\u003eMaterial \/ Body Construction\u003c\/strong\u003e\u003c\/th\u003e \u003ctd class=\"col data\"\u003eRobust Fire Service Metal Alloy\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth class=\"col label\" scope=\"row\"\u003e\u003cstrong\u003eAgency Listings \u0026amp; Approvals\u003c\/strong\u003e\u003c\/th\u003e \u003ctd class=\"col data\"\u003eUL Listed, FM Approved\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth class=\"col label\" scope=\"row\"\u003e\u003cstrong\u003eApplicable NFPA Standards\u003c\/strong\u003e\u003c\/th\u003e \u003ctd class=\"col data\"\u003eNFPA Compliant (Fire Sprinkler \u0026amp; Standpipe Systems)\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable class=\"data table additional-attributes\" id=\"product-attribute-specs-table\"\u003e\n\u003ccaption class=\"table-caption\"\u003eMore Information\u003c\/caption\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth class=\"col label\" scope=\"row\"\u003eItem Number\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"Item Number\"\u003eSTORZ-CAP4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth class=\"col label\" scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"Weight\"\u003e2.000000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth class=\"col label\" scope=\"row\"\u003eBox Quantity\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"Box Quantity\"\u003e1.00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth class=\"col label\" scope=\"row\"\u003eCrate Quantity\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"Crate Quantity\"\u003e1.00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth class=\"col label\" scope=\"row\"\u003eDescription\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"Description\"\u003eSTORZ CAP4 W\/WEEP HOLE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth class=\"col label\" scope=\"row\"\u003eBrand\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"Brand\"\u003eFire Protection Products Inc\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth class=\"col label\" scope=\"row\"\u003ePrice Group\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"Price Group\"\u003eSR170\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth class=\"col label\" scope=\"row\"\u003ePricing UOM\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"Pricing UOM\"\u003eEA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth class=\"col label\" scope=\"row\"\u003eSearch Text\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"Search Text\"\u003eSTORZ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth class=\"col label\" scope=\"row\"\u003eVendor Part Number\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"Vendor Part Number\"\u003e4380002260\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.asc-es.com\/resource\/09-200%20FPPI%20Storz%20Type%20Fire%20Dept%20Connections%20Submittal\"\u003eFPPI Storz Connections manufacturer submittal\u003c\/a\u003e · \u003ca href=\"https:\/\/vsncatalog.supplynet.com\/configure\/STORZ-CAP4\"\u003eSupplyNet exact item and manufacturer part number\u003c\/a\u003e\u003c\/p\u003e","brand":"Fire Protection Products Inc","offers":[{"title":"Default Title","offer_id":46372721524984,"sku":"STORZ-CAP4","price":150.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/7183\/3336\/files\/storz-cap-4-with-weep-hole-for-fire-protection-systems-2686301.jpg?v=1775620895"},{"product_id":"storz-cap-5-with-weep-hole-for-fire-sprinkler-systems","title":"Storz Cap 5\" With Weep Hole For Fire Sprinkler Systems","description":"\u003cp\u003eThe FPPI 5-inch Storz cap with weep hole is a cap-only replacement for a matching Storz connection. SupplyNet identifies this item as STORZ-CAP5, manufacturer part 4380002262; it is not a complete fire department connection body-and-cap assembly.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eConnection size\u003c\/b\u003e: 5-inch Storz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWeep-hole design\u003c\/b\u003e: FPPI states that the UL Listed caps have a weep hole to mitigate the risk of unintended system pressurization.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eConfiguration\u003c\/b\u003e: Cap only, rather than the straight or elbow body-and-cap assemblies listed separately in the manufacturer sheet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eManufacturer reference\u003c\/b\u003e: FPPI Storz Connections submittal, Figures 09-200 and 09-230, revision dated June 26, 2024.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eMatch the Storz connection size and required cap configuration before ordering. Do not substitute this weep-hole cap for a test cap or treat it as a pressure-tight closure. Refer to the manufacturer instructions for the applicable connection and system.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eLegacy table clarification\u003c\/b\u003e: The existing tables below are retained unchanged. The referenced manufacturer sheet identifies UL Listed weep-hole caps, but does not establish the tables’ FM Approved claim or blanket NFPA-compliance wording. Their generic material descriptions and weight entries are not newly verified material or shipping specifications.\u003c\/p\u003e\u003ctable class=\"data table additional-attributes\" id=\"product-attribute-specs-table\"\u003e \u003ccaption class=\"table-caption\"\u003eTechnical Specifications \u0026amp; Compliance\u003c\/caption\u003e \u003ctbody\u003e \u003ctr\u003e \u003cth class=\"col label\" scope=\"row\"\u003e\u003cstrong\u003eManufacturer \/ Brand\u003c\/strong\u003e\u003c\/th\u003e \u003ctd class=\"col data\"\u003eFire Protection Products Inc\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth class=\"col label\" scope=\"row\"\u003e\u003cstrong\u003eModel \/ Series Number \/ SIN\u003c\/strong\u003e\u003c\/th\u003e \u003ctd class=\"col data\"\u003eSTORZ-CAP5 \/ 4380002262\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth class=\"col label\" scope=\"row\"\u003e\u003cstrong\u003eConnection \/ Thread Size \u0026amp; Type\u003c\/strong\u003e\u003c\/th\u003e \u003ctd class=\"col data\"\u003e5\" Storz Connection\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth class=\"col label\" scope=\"row\"\u003e\u003cstrong\u003eMaterial \/ Body Construction\u003c\/strong\u003e\u003c\/th\u003e \u003ctd class=\"col data\"\u003eHeavy-Duty Fire Protection Grade Material\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth class=\"col label\" scope=\"row\"\u003e\u003cstrong\u003eAgency Listings \u0026amp; Approvals\u003c\/strong\u003e\u003c\/th\u003e \u003ctd class=\"col data\"\u003eUL Listed, FM Approved\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003cth class=\"col label\" scope=\"row\"\u003e\u003cstrong\u003eApplicable NFPA Standards\u003c\/strong\u003e\u003c\/th\u003e \u003ctd class=\"col data\"\u003eNFPA Compliant (Fire Sprinkler \u0026amp; Standpipe Systems)\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable class=\"data table additional-attributes\" id=\"product-attribute-specs-table\"\u003e\n\u003ccaption class=\"table-caption\"\u003eMore Information\u003c\/caption\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth class=\"col label\" scope=\"row\"\u003eItem Number\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"Item Number\"\u003eSTORZ-CAP5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth class=\"col label\" scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"Weight\"\u003e2.000000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth class=\"col label\" scope=\"row\"\u003eBox Quantity\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"Box Quantity\"\u003e1.00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth class=\"col label\" scope=\"row\"\u003eCrate Quantity\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"Crate Quantity\"\u003e1.00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth class=\"col label\" scope=\"row\"\u003eDescription\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"Description\"\u003eSTORZ CAP5 W\/WEEP HOLE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth class=\"col label\" scope=\"row\"\u003eBrand\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"Brand\"\u003eFire Protection Products Inc\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth class=\"col label\" scope=\"row\"\u003ePrice Group\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"Price Group\"\u003eSR170\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth class=\"col label\" scope=\"row\"\u003ePricing UOM\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"Pricing UOM\"\u003eEA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth class=\"col label\" scope=\"row\"\u003eSearch Text\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"Search Text\"\u003eSTORZ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth class=\"col label\" scope=\"row\"\u003eVendor Part Number\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"Vendor Part Number\"\u003e4380002262\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.asc-es.com\/resource\/09-200%20FPPI%20Storz%20Type%20Fire%20Dept%20Connections%20Submittal\"\u003eFPPI Storz Connections manufacturer submittal\u003c\/a\u003e · \u003ca href=\"https:\/\/vsncatalog.supplynet.com\/configure\/STORZ-CAP5\"\u003eSupplyNet exact item and manufacturer part number\u003c\/a\u003e\u003c\/p\u003e","brand":"Fire Protection Products Inc","offers":[{"title":"Default Title","offer_id":46372721623288,"sku":"STORZ-CAP5","price":246.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/7183\/3336\/files\/storz-cap-5-with-weep-hole-for-fire-sprinkler-systems-3779324.jpg?v=1775620895"},{"product_id":"4-x-4-storz-assembly-straight-fnpt-fire-connection","title":"4\" X 4\" Storz Assembly Straight FNPT Fire Connection","description":"\u003cdiv\u003e\n\u003cp\u003eThe 4\" x 4\" Storz Assembly Straight FNPT Fire Connection installs directly into commercial fire sprinkler and standpipe systems to provide a high-capacity, quick-connect interface for large diameter fire hoses. By combining a 4-inch straight FNPT thread with a Storz coupling, this assembly enables rapid, secure hose attachment during emergency operations, minimizing deployment time when high-volume water supply is critical.\u003c\/p\u003e \u003cp\u003eEngineered to comply with applicable National Fire Protection Association (NFPA) requirements for water-based fire protection systems, this component supports code-compliant installations. Its UL Listing verifies that the assembly meets rigorous performance and safety standards required by commercial trade contractors and facility engineers.\u003c\/p\u003e \u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eQuick-Connect Storz Coupling:\u003c\/strong\u003e Integrates a Storz connection to allow rapid, quarter-turn attachment of large diameter fire hoses during emergency response.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eCorrosion-Resistant Construction:\u003c\/strong\u003e Built from high-strength materials designed to withstand harsh fire service environments, heavy wear, and prolonged exposure.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eBalanced Manageability:\u003c\/strong\u003e Weighs 4.65 lbs, providing structural robustness while remaining manageable for efficient field installation.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eSystem Integration:\u003c\/strong\u003e Interfaces seamlessly with standard large diameter fire hoses and integrates directly into commercial sprinkler and standpipe networks.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ctable\u003e \u003cthead\u003e \u003ctr\u003e \u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e \u003cth\u003e\u003cstrong\u003eDetail\u003c\/strong\u003e\u003c\/th\u003e \u003c\/tr\u003e \u003c\/thead\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eManufacturer \/ Brand\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003eFire Protection Products Inc (FPPI)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eModel \/ Series Number \/ SIN\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003e4\" x 4\" Storz Assembly Straight FNPT\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eConnection \/ Thread Size \u0026amp; Type\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003e4\" x 4\" Straight FNPT and Storz Coupling\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eMaterial \/ Body Construction\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003eCorrosion-resistant, high-strength metal\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eAgency Listings \u0026amp; Approvals\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003eUL Listed\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eApplicable NFPA Standards\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003eNFPA compliant for fire sprinkler and standpipe systems\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\n\u003c\/table\u003e \u003cp\u003eContractors must verify local Authority Having Jurisdiction (AHJ) requirements and review the manufacturer technical documentation prior to installing this fire connection assembly.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDocumentation:\u003c\/strong\u003e \u003ca href=\"https:\/\/www.asc-es.com\/resource\/09-200%20FPPI%20Storz%20Type%20Fire%20Dept%20Connections%20Submittal\"\u003eDownload Manufacturer Technical Data \u0026amp; Cut Sheet (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Fire Protection Products Inc","offers":[{"title":"Default Title","offer_id":46372721656056,"sku":"09-205-00","price":317.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/7183\/3336\/files\/4-x-4-storz-assembly-straight-fnpt-fire-connection-9588285.jpg?v=1775620895"},{"product_id":"cap-and-chain-2-5-brass-cap-for-fire-protection-system","title":"FPPI 07-266 Brass Cap with Chain, CHI Thread","description":"\u003cdiv\u003e\n\u003cp\u003eFPPI part 07-266 is a brass cap with chain identified by the supplier as a CHI-thread configuration. The cap protects the mating male connection from debris and thread damage.\u003c\/p\u003e\n\u003cp\u003eThe supplier’s heading and descriptive text disagree on nominal size. Confirm the exact size and CHI thread dimensions with FPPI before ordering; do not substitute an NST cap based only on apparent diameter.\u003c\/p\u003e\n\u003ctable\u003e \u003cthead\u003e \u003ctr\u003e \u003cth\u003e\u003cb\u003eTechnical Parameter\u003c\/b\u003e\u003c\/th\u003e \u003cth\u003e\u003cb\u003eSpecification Detail\u003c\/b\u003e\u003c\/th\u003e \u003c\/tr\u003e \u003c\/thead\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd\u003e\u003cb\u003eManufacturer \/ Brand\u003c\/b\u003e\u003c\/td\u003e \u003ctd\u003eFire Protection Products Inc (FPPI)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cb\u003eModel \/ Series Number \/ SIN\u003c\/b\u003e\u003c\/td\u003e \u003ctd\u003e07-266 CHI-thread brass cap with chain\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cb\u003eConnection \/ Thread Size \u0026amp; Type\u003c\/b\u003e\u003c\/td\u003e \u003ctd\u003eCHI thread; confirm nominal size and thread dimensions before ordering.\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cb\u003eMaterial \/ Body Construction\u003c\/b\u003e\u003c\/td\u003e \u003ctd\u003eB124 Brass Alloy with Integrated Brass Chain\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cb\u003eAgency Listings \u0026amp; Approvals\u003c\/b\u003e\u003c\/td\u003e \u003ctd\u003eRefer to the manufacturer’s current part-specific documentation.\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cb\u003eApplicable NFPA Standards\u003c\/b\u003e\u003c\/td\u003e \u003ctd\u003eFollow the manufacturer’s installation instructions and applicable project requirements.\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.asc-es.com\/resource\/07-200%20FPPI%20Brass%20Cap%20Submittal\" target=\"_blank\" rel=\"noopener\"\u003eFPPI brass-cap family technical reference (2022)\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Fire Protection Products Inc","offers":[{"title":"Default Title","offer_id":46372721688824,"sku":"07-266","price":30.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/7183\/3336\/files\/cap-and-chain-25-brass-cap-for-fire-protection-system-5414671.jpg?v=1775620895"},{"product_id":"viking-1-5-100-nst-rack-hose-durable-safety-solution","title":"Viking 1.5\" 100' NST Rack Hose Durable Safety Solution","description":"\u003cdiv\u003e\n\u003cp\u003eThe Viking 1.5\" 100' NST Rack Hose provides dependable fire protection tailored for commercial and institutional settings. Engineered for use with semiautomatic hose racks and reels, this interior assembly integrates directly into Class II standpipe systems to deliver rapid water access during an emergency. The lightweight, flexible design weighs approximately 10.81 pounds, allowing facility maintenance personnel and building occupants to deploy the line quickly and efficiently when immediate fire suppression is required.\u003c\/p\u003e \u003cp\u003eThis fire hose strictly conforms to NFPA guidelines for performance and installation best practices. It meets rigorous third-party safety criteria by maintaining both UL\/ULC Listings and FM Approvals, ensuring full compliance with commercial building codes and life safety standards.\u003c\/p\u003e \u003cul\u003e \u003cli\u003e\n\u003cb\u003eThermoplastic Polyurethane (TPU) Lining:\u003c\/b\u003e Resists chemicals and mildew to extend service life and prevent internal degradation in humid environments.\u003c\/li\u003e \u003cli\u003e\n\u003cb\u003eRugged Outer Jacket:\u003c\/b\u003e Constructed from durable polyester to provide high tensile strength against abrasion and wear during deployment.\u003c\/li\u003e \u003cli\u003e\n\u003cb\u003eSolid Brass Fittings:\u003c\/b\u003e Resists corrosion to maintain reliable, secure coupling integrity under emergency pressure.\u003c\/li\u003e \u003cli\u003e\n\u003cb\u003eClass II Compatibility:\u003c\/b\u003e Sized specifically for standard interior fire protection and rack storage systems.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ctable\u003e \u003cthead\u003e \u003ctr\u003e \u003cth\u003e\u003cstrong\u003eTechnical Specification\u003c\/strong\u003e\u003c\/th\u003e \u003cth\u003e\u003cstrong\u003eDetails\u003c\/strong\u003e\u003c\/th\u003e \u003c\/tr\u003e \u003c\/thead\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eManufacturer \/ Brand\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003eViking \/ Fire Protection Products Inc\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eModel \/ Series Number \/ SIN\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003e1.5\" 100' NST Rack Hose\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eConnection \/ Thread Size \u0026amp; Type\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003e1.5\" Diameter with National Standard Thread (NST)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eMaterial \/ Body Construction\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003eThermoplastic Polyurethane (TPU) liner with polyester outer jacket and solid brass fittings\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eAgency Listings \u0026amp; Approvals\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003eUL Listed, ULC Listed, FM Approved\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eApplicable NFPA Standards\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003eConforms to NFPA fire hose guidelines\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\n\u003c\/table\u003e \u003cp\u003eAlways verify local Authority Having Jurisdiction (AHJ) mandates and consult the manufacturer technical data sheet prior to system installation or replacement.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDocumentation:\u003c\/strong\u003e \u003ca href=\"https:\/\/www.asc-es.com\/resource\/07-602%20FPPI%20Rack%20\u0026amp;%20Reel%20Fire%20Hose\"\u003eDownload Manufacturer Technical Data \u0026amp; Cut Sheet (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Fire Protection Products Inc","offers":[{"title":"Default Title","offer_id":46372722802936,"sku":"07-604","price":209.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/7183\/3336\/files\/Viking1.5_100_NSTRackHoseDurableSafetySolution.jpg?v=1787230347"},{"product_id":"2-inch-x-1-1-2-inch-brass-fxm-nst-reducer-for-plumbing","title":"FPPI 07-420 Brass Pin-Lug Reducer, 2½-Inch FNST x 1½-Inch MNST","description":"\u003cp\u003eFPPI 07-420 is a brass pin-lug reducer with a 2-1\/2-inch female NST connection and a 1-1\/2-inch male NST connection. It transitions between the specified hose-thread sizes.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eConnections\u003c\/b\u003e: 2-1\/2-inch female NST by 1-1\/2-inch male NST.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eConstruction\u003c\/b\u003e: Brass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrip\u003c\/b\u003e: Pin-lug design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eVendor reference\u003c\/b\u003e: 4324001204.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eMatch both connection sizes and thread standards to the equipment. NST hose threads must not be assumed interchangeable with NPT plumbing threads or regional fire-service threads.\u003c\/p\u003e\u003ctable\u003e \u003ctr\u003e \u003ctd\u003e\u003cb\u003eManufacturer \/ Brand\u003c\/b\u003e\u003c\/td\u003e \u003ctd\u003eFire Protection Products Inc\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cb\u003eModel \/ Series Number \/ SIN\u003c\/b\u003e\u003c\/td\u003e \u003ctd\u003e07-420\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cb\u003eConnection \/ Thread Size \u0026amp; Type\u003c\/b\u003e\u003c\/td\u003e \u003ctd\u003e2½-inch female NST x 1½-inch male NST\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cb\u003eMaterial \/ Body Construction\u003c\/b\u003e\u003c\/td\u003e \u003ctd\u003eBrass; confirm the ordered finish with the supplier.\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cb\u003eApplicable NFPA Standards\u003c\/b\u003e\u003c\/td\u003e \u003ctd\u003eFollow the manufacturer’s installation instructions and applicable project requirements.\u003c\/td\u003e \u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003ca href=\"https:\/\/vsncatalog.supplynet.com\/configure\/07-420\"\u003eSupplier product information for 07-420\u003c\/a\u003e\u003c\/p\u003e","brand":"Fire Protection Products Inc","offers":[{"title":"Default Title","offer_id":46372722835704,"sku":"07-420","price":30.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/7183\/3336\/files\/212-x-112-fxm-nst-br-reducer-636584.png?v=1776006675"},{"product_id":"4-2-1-2-sfdc-straight-rb-fire-department-connection","title":"4\" 2-1\/2\" SFDC Straight RB Fire Department Connection","description":"\u003cp\u003eThe FPPI Figure 09-000 straight-pattern fire department connection has a 4-inch IPS outlet and two 2½-inch pin-lug inlets. This listing identifies the rough-brass configuration.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eConstruction\u003c\/b\u003e: Cast brass body with a single brass clapper and brass seats.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eListings and approvals\u003c\/b\u003e: UL Listed and FM Approved at 300 psi, as stated in the manufacturer’s submittal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSwivel gaskets\u003c\/b\u003e: Included according to the manufacturer’s description.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInlet threads\u003c\/b\u003e: Multiple local fire-service thread patterns are available in this family. Confirm the supplied inlet thread against the responding department’s equipment before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe saved model code does not establish which of the manufacturer’s listed inlet thread patterns is supplied. Do not assume that every nominal 2½-inch fire-hose connection is interchangeable. Protective caps or plugs should be installed to protect the threads and waterway; their inclusion is not established by this listing.\u003c\/p\u003e\u003cp\u003eThe manufacturer identifies this brass product as containing lead and not for use in water systems intended for human consumption. Follow the manufacturer’s installation instructions and do not overtighten the body onto the outlet nipple.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.asc-es.com\/resource\/FDC%20Single%20Clapper%20Siamese\"\u003eFPPI Figure 09-000 straight single-clapper FDC specifications, October 2024\u003c\/a\u003e\u003c\/p\u003e","brand":"Fire Protection Products Inc","offers":[{"title":"Default Title","offer_id":46372723065080,"sku":"09-000-RB","price":154.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/7183\/3336\/files\/trim-accelerator-vxr-galv-808000_9d716d0c-d8dd-467b-be4a-f758c82dd0a6.jpg?v=1787885532"},{"product_id":"2-1-2-hose-valve-threaded-x-threaded-for-fire-hoses","title":"2-1\/2\" Hose Valve Threaded X Threaded For Fire Hoses","description":"\u003cp\u003eZurn Wilkins 212-F100 is a 2-1\/2-inch F100 threaded-by-threaded fire hose valve.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eModel reference\u003c\/b\u003e: The supplier identifies the F100 standpipe hose-valve family.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eApplication reference\u003c\/b\u003e: The supplier describes use on a fire hose rack assembly or as a fire department outlet connection.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe complete size and model code helps distinguish this valve from pressure-regulating and differently threaded options. Confirm both thread standards, pressure limits and installation requirements for the project.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eRetained table clarification\u003c\/b\u003e: The legacy table below is preserved for reference. Broader material, performance, compatibility and approval claims in it are not verified by the exact supplier record and must not be treated as confirmed specifications; use the verified details above and current manufacturer documentation.\u003c\/p\u003e\u003ctable\u003e \u003cthead\u003e \u003ctr\u003e \u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e \u003cth\u003e\u003cstrong\u003eDetail\u003c\/strong\u003e\u003c\/th\u003e \u003c\/tr\u003e \u003c\/thead\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eManufacturer \/ Brand\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003eZurn Wilkins\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eModel \/ Series Number \/ SIN\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003e212-F100\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eConnection \/ Thread Size \u0026amp; Type\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003e2-1\/2\" Threaded X Threaded\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eMaterial \/ Body Construction\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003eDuctile Iron\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eAgency Listings \u0026amp; Approvals\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003eUL Listed, FM Approved\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eApplicable NFPA Standards\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003eNFPA 13, NFPA 14, NFPA 25\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003ca href=\"https:\/\/vsncatalog.supplynet.com\/configure\/212-F100\"\u003eSupplyNet exact 212-F100 item reference\u003c\/a\u003e\u003c\/p\u003e","brand":"Zurn Wilkins","offers":[{"title":"Default Title","offer_id":46372723130616,"sku":"212-F100","price":146.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/7183\/3336\/files\/2-1_2_HoseValveThreadedXThreadedForFireHoses.jpg?v=1787263068"},{"product_id":"2-5-swivel-and-cap-gasket-for-fire-protection","title":"2.5\" Swivel And Cap Gasket For Fire Protection","description":"\u003cp\u003eThe FPPI 07-920 is a nominal 2½-inch hose swivel gasket. The manufacturer’s Hose Swivel Gaskets submittal identifies the full part number as 07-920-00.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eNominal size\u003c\/b\u003e: 2½ inches.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eApplication\u003c\/b\u003e: Hose swivel gasket.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eManufacturer reference\u003c\/b\u003e: Figure 07-918 gasket family, with 07-920-00 assigned to the 2½-inch size.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eConfirm the gasket seat, dimensions, and suitability for the actual swivel or cap before ordering a replacement. The referenced submittal does not specify the gasket material, pressure or temperature limits, or UL\/FM approvals; those properties should not be assumed from the nominal size.\u003c\/p\u003e\u003cp\u003eThe submittal’s packing quantities describe manufacturer packaging, not necessarily the quantity sold in this listing.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.asc-es.com\/resource\/07-918%20FPPI%20Hose%20Swivel%20Gaskets%20Submittal\"\u003eFPPI Hose Swivel Gaskets specifications, April 2022\u003c\/a\u003e\u003c\/p\u003e","brand":"Fire Protection Products Inc","offers":[{"title":"Default Title","offer_id":46372723228920,"sku":"07-920","price":3.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/7183\/3336\/files\/212-swivel-cap-gasket-685617.png?v=1776006680"},{"product_id":"2-fnpt-x-2-mnh-gate-valve-rb-300psi-fire-equipment","title":"2\" FNPT x 2\" MNH Gate Valve RB 300PSI Fire Equipment","description":"\u003cdiv\u003e\n\u003cp\u003eThe Viking 2\" FNPT x 2\" MNH Gate Valve provides dependable water supply shutoff and flow control for commercial fire sprinkler and hose line assemblies. This component installs directly into fire protection piping networks to regulate water delivery and streamline maintenance operations.\u003c\/p\u003e \u003cp\u003eManufactured in compliance with national NFPA fire safety regulations, this valve satisfies strict municipal and industrial code requirements for fire suppression infrastructure. Its UL Listing and FM Approval verify that it meets rigorous industry safety standards for high-pressure fire protection applications.\u003c\/p\u003e \u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eRough Brass Construction:\u003c\/strong\u003e Delivers exceptional corrosion resistance and mechanical durability in demanding fire equipment environments.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003e300 PSI Working Pressure:\u003c\/strong\u003e Handles high-pressure water delivery conditions common in commercial fire suppression and standpipe setups.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003ePrecision Connections:\u003c\/strong\u003e Features a 2\" female National Pipe Thread (FNPT) inlet and a 2\" male National Hose (MNH) outlet for secure piping and hose integration.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eOperational Efficiency:\u003c\/strong\u003e Provides a dependable shutoff mechanism to minimize system downtime and reduce long-term maintenance costs.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ctable\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eManufacturer \/ Brand\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003eViking \/ Fire Protection Products Inc\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eModel \/ Series Number \/ SIN\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003e2\" FNPT x 2\" MNH Gate Valve RB 300PSI\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eConnection \/ Thread Size \u0026amp; Type\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003e2\" FNPT Inlet x 2\" MNH Outlet\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003ePressure Rating (WWP \/ Max Working Pressure)\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003e300 PSI\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eMaterial \/ Body Construction\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003eRough Brass\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eAgency Listings \u0026amp; Approvals\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003eUL Listed, FM Approved\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eApplicable NFPA Standards\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003eNFPA Compliant\u003c\/td\u003e \u003c\/tr\u003e\n\u003c\/table\u003e \u003cp\u003eContractors must verify all local Authority Having Jurisdiction (AHJ) guidelines and review the manufacturer technical specifications prior to commencing installation.\u003c\/p\u003e \u003c\/div\u003e","brand":"Fire Protection Products Inc","offers":[{"title":"Default Title","offer_id":46372723392760,"sku":"07-070","price":270.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/7183\/3336\/files\/212fnptx212-mnh-gate-vlv-rb-219239.png?v=1776006681"},{"product_id":"4-x-2-1-2-x-2-1-2-90-degree-fdc-grv-nst-connections","title":"4\" X 2-1\/2\" X 2-1\/2\" 90 Degree FDC GRV NST Connections","description":"\u003cp\u003eThe FPPI Fig. 09-090 is a 90-degree, single-clapper fire department connection for supplying supplemental water to a fire protection system. It combines two 2½-inch NST hose inlets with a 4-inch grooved system outlet.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eConnection layout\u003c\/b\u003e: Two 2½-inch swivel hose inlets and one 4-inch grooved outlet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eConstruction\u003c\/b\u003e: Brass body with a single brass clapper and brass seats.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHose connection\u003c\/b\u003e: Pin-lug swivels with gaskets.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eFire Protection Products Inc.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFigure\u003c\/th\u003e\n\u003ctd\u003e09-090\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody configuration\u003c\/th\u003e\n\u003ctd\u003e90-degree, single-clapper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer rating\u003c\/th\u003e\n\u003ctd\u003eUL Listed and FM Approved at 300 psi, subject to the applicable configuration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eConfirm local fire-service thread requirements and the approved system design before ordering. Consult the manufacturer and the authority having jurisdiction for installation requirements.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.asc-es.com\/resource\/Single%20Clapper%20Siamese%2090%20Degree%20Grooved%20Submittal\"\u003eManufacturer specification sheet\u003c\/a\u003e\u003c\/p\u003e","brand":"Fire Protection Products Inc","offers":[{"title":"Default Title","offer_id":46372723491064,"sku":"09-090","price":227.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/7183\/3336\/files\/4x212x212-90-deg-fdc-grv-nst-645417.jpg?v=1774500296"},{"product_id":"fdc-sign-with-arrow-10-x-12-for-clear-direction","title":"FDC Sign With Arrow 10\" X 12\" For Clear Direction","description":"\u003cdiv\u003e\n\u003cp\u003eDirect emergency personnel straight to the fire department connection on commercial and industrial properties with this clear, highly visible safety sign. The 10-inch by 12-inch placard installs easily on exterior walls near your system connection point to support safety compliance and help emergency crews save valuable response time.\u003c\/p\u003e \u003cp\u003eGoverned by life safety requirements under NFPA 13 and local building codes for fire department connection identification, this sign ensures critical infrastructure remains easily locatable when seconds count. Bold lettering and an integrated directional arrow guide first responders directly to the hardware.\u003c\/p\u003e \u003cul\u003e \u003cli\u003e\n\u003cb\u003eDimensions:\u003c\/b\u003e Measures 10 inches by 12 inches for optimal visibility on exterior building surfaces.\u003c\/li\u003e \u003cli\u003e\n\u003cb\u003eClear Direction:\u003c\/b\u003e Features a prominent directional arrow and bold text pointing straight to the FDC.\u003c\/li\u003e \u003cli\u003e\n\u003cb\u003eApplication:\u003c\/b\u003e Designed specifically for commercial and industrial buildings to maintain emergency preparedness.\u003c\/li\u003e \u003cli\u003e\n\u003cb\u003eInstallation:\u003c\/b\u003e Mounts quickly near connection points to satisfy safety compliance standards.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ctable\u003e \u003cthead\u003e \u003ctr\u003e \u003cth\u003e\u003cb\u003eSpecification Field\u003c\/b\u003e\u003c\/th\u003e \u003cth\u003e\u003cb\u003eDetail\u003c\/b\u003e\u003c\/th\u003e \u003c\/tr\u003e \u003c\/thead\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd\u003e\u003cb\u003eManufacturer \/ Brand\u003c\/b\u003e\u003c\/td\u003e \u003ctd\u003eFire Protection Products Inc\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cb\u003eModel \/ Series Number\u003c\/b\u003e\u003c\/td\u003e \u003ctd\u003eFDC Sign With Arrow\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cb\u003eDimensions\u003c\/b\u003e\u003c\/td\u003e \u003ctd\u003e10 in x 12 in\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cb\u003eProduct Category\u003c\/b\u003e\u003c\/td\u003e \u003ctd\u003eEmergency \u0026amp; Exit Signs\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cb\u003eApplicable NFPA Standards\u003c\/b\u003e\u003c\/td\u003e \u003ctd\u003eNFPA 13\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\n\u003c\/table\u003e \u003cp\u003eVerify local Authority Having Jurisdiction (AHJ) mounting height and placement requirements prior to installation.\u003c\/p\u003e \n\u003cp\u003e\u003cstrong\u003eProduct Specifications:\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"https:\/\/www.asc-es.com\/resource\/Identification%20Signs\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer Specifications â€” FDC Arrow Identification Sign (2022)\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Fire Protection Products Inc","offers":[{"title":"Default Title","offer_id":46372723654904,"sku":"02-052","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/7183\/3336\/files\/4-x-8-metal-wall-plate-fdc-sign-474089.png?v=1776004381"},{"product_id":"4-x-2-1-2-straight-tempe-fire-department-connection","title":"4\" X 2-1\/2\" Straight Tempe Fire Department Connection","description":"\u003cp\u003eFPPI 09-010 is a straight Tempe fire department connection in the 4 by 2-1\/2 by 2-1\/2-inch configuration. The supplier expressly designates this version for Tempe, Arizona only.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eConfiguration\u003c\/b\u003e: Straight Tempe FDC, 4 by 2-1\/2 by 2-1\/2 inches.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eConstruction\u003c\/b\u003e: Supplier describes solid brass with a single clapper.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCross-reference\u003c\/b\u003e: FPPI vendor part 4380000140.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLocation restriction\u003c\/b\u003e: For Tempe, AZ only; confirm local connection requirements.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eChoose this configuration only when its connection standard matches the specified fire-department interface. The supplier describes FPPI FDC listings at family level; verify exact approvals and thread details before submittal.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eLegacy table clarification\u003c\/b\u003e: The retained table reverses the normal FDC connection roles: do not use its 4-inch inlet\/dual 2-1\/2-inch outlet wording for selection. Its blanket approval and NFPA claims are not a substitute for exact manufacturer documentation.\u003c\/p\u003e\u003ctable\u003e \u003ctr\u003e \u003ctd\u003e\u003cb\u003eManufacturer \/ Brand\u003c\/b\u003e\u003c\/td\u003e \u003ctd\u003eViking \/ Fire Protection Products Inc\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cb\u003eModel \/ Series Number \/ SIN\u003c\/b\u003e\u003c\/td\u003e \u003ctd\u003e4\" X 2-1\/2\" Straight Tempe Fire Department Connection\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cb\u003eConnection \/ Thread Size \u0026amp; Type\u003c\/b\u003e\u003c\/td\u003e \u003ctd\u003e4\" Inlet and Dual 2-1\/2\" Outlets\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cb\u003eMaterial \/ Body Construction\u003c\/b\u003e\u003c\/td\u003e \u003ctd\u003eSolid Brass\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cb\u003eAgency Listings \u0026amp; Approvals\u003c\/b\u003e\u003c\/td\u003e \u003ctd\u003eUL\/ULc Listed, FM Approved\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cb\u003eApplicable NFPA Standards\u003c\/b\u003e\u003c\/td\u003e \u003ctd\u003eNFPA Compliant\u003c\/td\u003e \u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003ca href=\"https:\/\/vsncatalog.supplynet.com\/configure\/09-010\"\u003eSupplier product information for 09-010\u003c\/a\u003e\u003c\/p\u003e","brand":"Fire Protection Products Inc","offers":[{"title":"Default Title","offer_id":46372723753208,"sku":"09-010","price":155.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/7183\/3336\/files\/4x212x212-straight-tempe-919204.png?v=1776006682"},{"product_id":"4-x-2-1-2-straight-fdc-grv-nst-brass-connection","title":"4\" X 2-1\/2\" Straight FDC GRV NST Brass Connection","description":"\u003cp\u003eThe FPPI Fig. 09-070 is a straight-pattern, single-clapper fire department connection. Two 2½-inch NST hose inlets connect responding fire crews to a 4-inch grooved outlet serving the fire protection piping.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eConfiguration\u003c\/b\u003e: Straight body with a single-clapper design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHose inlets\u003c\/b\u003e: Two 2½-inch NST pin-lug connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSystem outlet\u003c\/b\u003e: 4-inch grooved connection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eConstruction\u003c\/b\u003e: Rough-brass finish.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSelect the connection for the local fire-service threads and approved system layout. Consult the manufacturer and authority having jurisdiction before installation.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.asc-es.com\/resource\/FPPI%20Product%20Catalog\"\u003eManufacturer product catalog\u003c\/a\u003e\u003c\/p\u003e","brand":"Fire Protection Products Inc","offers":[{"title":"Default Title","offer_id":46372723785976,"sku":"09-070","price":196.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/7183\/3336\/files\/4x212x212straigh-fdc-grv-nst-762689.jpg?v=1774499066"},{"product_id":"2-1-2-nst-single-snoot-fdc-brass-construction-system","title":"2-1\/2\" NST Single Snoot FDC Brass Construction System","description":"\u003cp\u003eFPPI 07-550 is a 2-1\/2-inch NST single open snoot for a fire department connection.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eConstruction\u003c\/b\u003e: The supplier describes the open snoot as brass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eConnection arrangement\u003c\/b\u003e: The catalog identifies an NST swivel inlet with an NPT outlet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExact cross-reference\u003c\/b\u003e: Supplier 07-550 maps to vendor 4380004000.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe exact thread designation helps avoid substituting a regional-thread option. Confirm outlet size, connection arrangement and required additional FDC components before ordering; this component is not a complete installed FDC assembly.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eRetained table clarification\u003c\/b\u003e: The legacy table below is preserved for reference. Broader material, performance, compatibility and approval claims in it are not verified by the exact supplier record and must not be treated as confirmed specifications; use the verified details above and current manufacturer documentation.\u003c\/p\u003e\u003ctable style=\"width:100%; border-collapse: collapse; margin-top: 15px; margin-bottom: 15px;\"\u003e \u003cthead\u003e \u003ctr style=\"background-color: #f2f2f2;\"\u003e \u003cth style=\"border: 1px solid #ddd; padding: 8px; text-align: left;\"\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e \u003cth style=\"border: 1px solid #ddd; padding: 8px; text-align: left;\"\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e \u003c\/tr\u003e \u003c\/thead\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eManufacturer \/ Brand\u003c\/strong\u003e\u003c\/td\u003e \u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eViking \/ Fire Protection Products Inc\u003c\/td\u003e \u003c\/tr\u003e \u003ctr style=\"background-color: #f9f9f9;\"\u003e \u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eModel \/ Series Number \/ SIN\u003c\/strong\u003e\u003c\/td\u003e \u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e2-1\/2\" NST Single Snoot FDC\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eConnection \/ Thread Size \u0026amp; Type\u003c\/strong\u003e\u003c\/td\u003e \u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e2-1\/2\" NST Inlet, NPT Outlet\u003c\/td\u003e \u003c\/tr\u003e \u003ctr style=\"background-color: #f9f9f9;\"\u003e \u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003ePressure Rating (WWP \/ Max Working Pressure)\u003c\/strong\u003e\u003c\/td\u003e \u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eHigh-Pressure Compliant\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eMaterial \/ Body Construction\u003c\/strong\u003e\u003c\/td\u003e \u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eBrass\u003c\/td\u003e \u003c\/tr\u003e \u003ctr style=\"background-color: #f9f9f9;\"\u003e \u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eAgency Listings \u0026amp; Approvals\u003c\/strong\u003e\u003c\/td\u003e \u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eUL Listed, FM Approved\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eApplicable NFPA Standards\u003c\/strong\u003e\u003c\/td\u003e \u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eNFPA Compliant\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003ca href=\"https:\/\/vsncatalog.supplynet.com\/configure\/07-550\"\u003eSupplyNet exact 07-550 item reference\u003c\/a\u003e\u003c\/p\u003e","brand":"Fire Protection Products Inc","offers":[{"title":"Default Title","offer_id":46372723884280,"sku":"07-550","price":76.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/7183\/3336\/files\/2-12NSTSingleSnootFDCBrassConstructionSystem_2.jpg?v=1787886657"},{"product_id":"2-1-2-plastic-cap-with-chain-for-abs-nst-fdc-connection","title":"2-1\/2\" Plastic Cap with Chain For ABS NST FDC Connection","description":"\u003cp\u003eFPPI 07-280 is a red 2-1\/2-inch NST plastic hose-valve cap with chain.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial designation\u003c\/b\u003e: The exact item heading identifies ABS plastic.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eIncluded accessory\u003c\/b\u003e: The catalog lists the cap with a chain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExact cross-reference\u003c\/b\u003e: Supplier 07-280 maps to vendor 4324001072.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe size, thread and vendor reference help distinguish this cap from breakable covers and other thread options. Confirm the mating hose-valve connection and chain attachment; the record does not establish a pressure-retaining closure.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eRetained table clarification\u003c\/b\u003e: The legacy table below is preserved for reference. Broader material, performance, compatibility and approval claims in it are not verified by the exact supplier record and must not be treated as confirmed specifications; use the verified details above and current manufacturer documentation.\u003c\/p\u003e\u003ctable\u003e \u003cthead\u003e \u003ctr\u003e \u003cth\u003e\u003cstrong\u003eTechnical Specification\u003c\/strong\u003e\u003c\/th\u003e \u003cth\u003e\u003cstrong\u003eDetails\u003c\/strong\u003e\u003c\/th\u003e \u003c\/tr\u003e \u003c\/thead\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eManufacturer \/ Brand\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003eViking \/ Fire Protection Products Inc\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eModel \/ Series Number\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003e2-1\/2\" Plastic Cap with Chain\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eConnection \/ Thread Size \u0026amp; Type\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003e2-1\/2\" ABS NST (National Standard Thread)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eMaterial \/ Body Construction\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003eImpact-resistant plastic with metal chain\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eAgency Listings \u0026amp; Approvals\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003eUL Listed, FM Approved\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eApplicable NFPA Standards\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003eNFPA compliant for fire suppression and FDC protection\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003ca href=\"https:\/\/vsncatalog.supplynet.com\/configure\/07-280\"\u003eSupplyNet exact 07-280 item reference\u003c\/a\u003e\u003c\/p\u003e","brand":"Fire Protection Products Inc","offers":[{"title":"Default Title","offer_id":46372723982584,"sku":"07-280","price":5.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/7183\/3336\/files\/2-12-pls-cap-wchain-abs-nst-601367.png?v=1776006684"},{"product_id":"2-1-2-plug-pls-with-chain-absred-for-thread-protection","title":"2 1\/2\" Plug PLS With Chain ABSRED For Thread Protection","description":"\u003cp\u003eThe FPPI 07-281 is a red ABS plastic plug with chain for protecting 2½-inch NST female threads on hose valves and fire department connections. It helps protect threads from damage and debris when the connection is not in use.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial\u003c\/b\u003e: ABS plastic plug.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eConnection\u003c\/b\u003e: 2½-inch NST; verify the connection thread before installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRetaining chain\u003c\/b\u003e: Keeps the removed plug attached to the valve or connection during service.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInstallation\u003c\/b\u003e: Thread into the female connection hand tight and attach the chain to the equipment's chain tab.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDo not pressurize.\u003c\/strong\u003e This plug is for thread protection only. Do not use it to contain pressure or for system pressure testing. Failure under pressure may cause serious bodily injury or property damage.\u003c\/p\u003e\u003cp\u003eConfirm suitability and follow the manufacturer’s installation instructions before use.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.asc-es.com\/resource\/07-281%20FPPI%20Plastic%20Plugs%20with%20Chains%20Submittal\"\u003eFPPI 07-281 manufacturer specifications\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/www.asc-es.com\/resource\/07-281A%20FPPI%20Plastic%20Plug%20with%20Chain\"\u003eFPPI plastic plug installation and safety instructions\u003c\/a\u003e\u003c\/p\u003e","brand":"Fire Protection Products Inc","offers":[{"title":"Default Title","offer_id":46372724015352,"sku":"07-281","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/7183\/3336\/files\/2-12-plug-pls-wchain-absred-439174.png?v=1776006686"},{"product_id":"fire-department-connection-sign-6-x-2-for-safety","title":"Fire Department Connection Sign 6\" X 2\" For Safety","description":"\u003cdiv\u003e\n\u003cp\u003eThe Fire Department Connection Sign installs adjacent to fire sprinkler inlets and standpipe systems to provide immediate visual identification for emergency responders. This component mounts directly on exterior building walls or riser manifolds to guide fire suppression personnel straight to water supply connections during active emergency operations. Properly marking these access points satisfies vital life safety mandates enforced under NFPA 13 and NFPA 14 standards for commercial and industrial fire protection assemblies, ensuring strict adherence to local building codes and inspection requirements.\u003c\/p\u003e \u003cp\u003eEngineered for maximum reliability on the job site, this identification marker is built to withstand rigorous environmental conditions without fading or degrading.\u003c\/p\u003e \u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e Compact 6\" x 2\" rectangular format fits tightly on restricted surfaces near water inlets.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eWeather Resistance:\u003c\/strong\u003e Durable construction handles outdoor exposure to rain, wind, and direct sunlight, as well as indoor facility environments.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eHigh Visibility:\u003c\/strong\u003e Bold lettering ensures quick recognition from a distance by emergency personnel.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eCode Compliance:\u003c\/strong\u003e Fulfills standard fire protection labeling requirements for safety inspections and regulatory mandates.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ctable\u003e \u003cthead\u003e \u003ctr\u003e \u003cth\u003e\u003cstrong\u003eSpecification Field\u003c\/strong\u003e\u003c\/th\u003e \u003cth\u003e\u003cstrong\u003eDetails\u003c\/strong\u003e\u003c\/th\u003e \u003c\/tr\u003e \u003c\/thead\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eManufacturer \/ Brand\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003eFire Protection Products Inc\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eModel \/ Series Number\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003eFire Department Connection Sign 6\" X 2\"\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eConnection \/ Mounting Type\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003eSurface Mount\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eMaterial \/ Body Construction\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003eWeather-Resistant Signage Material\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eAgency Listings \u0026amp; Approvals\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003eMeets Industry Standards\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eApplicable NFPA Standards\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003eNFPA 13, NFPA 14\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\n\u003c\/table\u003e \u003cp\u003eAlways verify local Authority Having Jurisdiction (AHJ) requirements regarding placement height and specific wording before mounting identification signage. Consult the manufacturer technical data sheets for complete installation instructions and fastening recommendations.\u003c\/p\u003e \n\u003cp\u003e\u003cstrong\u003eProduct Specifications:\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"https:\/\/www.asc-es.com\/resource\/Identification%20Signs\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer Specifications â€” 6 Ã— 2-Inch Fire Department Connection Sign (2022)\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Fire Protection Products Inc","offers":[{"title":"Default Title","offer_id":46395231305976,"sku":"02-051","price":1.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/7183\/3336\/files\/shopping_d6e9b725-8280-4b06-b855-bf4622e41b76.webp?v=1792451828"},{"product_id":"fdc-wall-plates-for-fire-department-connection-identification","title":"FDC Wall Plates for Fire Department Connection Identification","description":"\u003cdiv\u003e\n\u003cp\u003eThe FDC Wall Plate is an essential life safety component engineered for clear Fire Department Connection identification on commercial and industrial buildings. Installed directly at exterior building walls around fire department connection piping, this plate ensures emergency responders can rapidly locate and identify automatic sprinkler and standpipe system inlets during active fire events. It integrates seamlessly into new construction projects and retrofit applications across diverse fire protection infrastructures.\u003c\/p\u003e \u003cp\u003eEngineered to comply with stringent life safety requirements, this component satisfies code-mandated marking regulations for emergency response equipment under NFPA 13 standards for fire sprinkler system installations. Utilizing this identification plate ensures facility compliance during Authority Having Jurisdiction (AHJ) inspections.\u003c\/p\u003e \u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eMaterial Composition:\u003c\/strong\u003e Durable construction options include ductile iron for superior mechanical strength, corrosion-resistant CPVC, aluminum, and brass.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eSystem Versatility:\u003c\/strong\u003e Fully compatible with wet pipe, dry pipe, pre-action, and deluge automatic fire sprinkler systems, as well as standpipe configurations.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eInstallation Flexibility:\u003c\/strong\u003e Designed for straightforward integration into both new construction projects and existing fire protection infrastructure retrofits.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eRegulatory Design:\u003c\/strong\u003e Features clear, highly visible lettering to ensure proper connection identification for municipal fire service personnel.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ctable\u003e \u003cthead\u003e \u003ctr\u003e \u003cth\u003eTechnical Parameter\u003c\/th\u003e \u003cth\u003eSpecification\u003c\/th\u003e \u003c\/tr\u003e \u003c\/thead\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eManufacturer \/ Brand\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003eFire Protection Products Inc\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eModel \/ Series Number\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003eFDC Wall Plates\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eConnection \/ Thread Size \u0026amp; Type\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003e2 1\/2\" and 4\" IPS Options (Select variations available)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eMaterial \/ Body Construction\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003eDuctile Iron, CPVC, Aluminum, Brass\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eAgency Listings \u0026amp; Approvals\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003eUL Listed, FM Approved\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eApplicable NFPA Standards\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003eNFPA 13\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\n\u003c\/table\u003e \u003cp\u003eContractors and facility managers must verify specific sizing, material selection, and mounting requirements with the local Authority Having Jurisdiction (AHJ) prior to installation. Always consult the manufacturer's engineering cut sheets for complete dimensional data and installation guidelines.\u003c\/p\u003e \u003c\/div\u003e","brand":"Fire Protection Products Inc","offers":[{"title":"Rough Brass \/ 2-1\/2 in. \/ AUTO SPKR","offer_id":46413661470968,"sku":"09-520","price":32.99,"currency_code":"USD","in_stock":true},{"title":"Rough Brass \/ 2-1\/2 in. \/ FIRE DEPT CONN","offer_id":46413661503736,"sku":null,"price":46.99,"currency_code":"USD","in_stock":true},{"title":"Rough Brass \/ 4 in. \/ FIRE DEPT CONN","offer_id":46413661634808,"sku":"09-510","price":58.99,"currency_code":"USD","in_stock":true},{"title":"Polished Chrome \/ 4 in. \/ FIRE DEPT CONN","offer_id":46413662028024,"sku":"09-510-10","price":66.99,"currency_code":"USD","in_stock":true},{"title":"Aluminum \/ 4 in. \/ AUTO SPKR","offer_id":46413662388472,"sku":"09-508","price":13.99,"currency_code":"USD","in_stock":true},{"title":"Aluminum \/ 4 in. \/ STANDPIPE","offer_id":46413662454008,"sku":"09-514","price":13.99,"currency_code":"USD","in_stock":true},{"title":"Aluminum \/ 4 in. \/ STANDPIPE-AUTO SPRK","offer_id":46413662486776,"sku":"09-516","price":13.99,"currency_code":"USD","in_stock":true},{"title":"Plastic \/ 4 in. \/ FIRE DEPT CONN","offer_id":46413662814456,"sku":"09-507","price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/7183\/3336\/files\/auto_sprk_wall_plate_fdc.png?v=1776007856"},{"product_id":"2-1-2-in-fnpt-x-mnst-angle-hose-valve","title":"2-1\/2 in. FNPT x MNST Angle Hose Valve","description":"\u003cdiv\u003e\n\u003cp\u003eThe 2-1\/2 in. FNPT x MNST Angle Hose Valve serves as a critical manual control point within standpipe systems and fire suppression water supply assemblies. It installs directly onto floor control valves, standpipe outlets, or fire department connections (FDCs) to regulate water flow into fire hoses during emergency response operations or system maintenance.\u003c\/p\u003e \u003cp\u003eThis component is engineered to meet the stringent design, installation, and performance criteria mandated by \u003cstrong\u003eNFPA 14\u003c\/strong\u003e (Standard for the Installation of Standpipe and Hose Systems) and \u003cstrong\u003eNFPA 13\u003c\/strong\u003e (Standard for the Installation of Sprinkler Systems). It satisfies critical code compliance requirements for pressure-regulating and non-pressure-regulating hose connections, ensuring that facility managers and fire contractors deploy reliable hardware capable of withstanding maximum working pressures during a high-demand firefighting scenario.\u003c\/p\u003e \u003ch2\u003eKey Features \u0026amp; Construction\u003c\/h2\u003e\n\u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eDurable Body Construction:\u003c\/strong\u003e Forged brass or bronze material construction resists corrosion and mechanical stress under high-pressure water flow.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003ePrecision Angle Design:\u003c\/strong\u003e 90-degree angle body configuration minimizes flow restriction and streamlines hose routing in tight cabinet enclosures or risers.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eStandard Connections:\u003c\/strong\u003e Features a 2-1\/2 inch Female National Pipe Thread (FNPT) inlet paired with a Male National Standard Thread (MNST \/ NH) outlet for universal fire hose compatibility.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eHigh-Pressure Operation:\u003c\/strong\u003e Rated for high working pressures to safely manage municipal water supplies and fire pump discharges without component failure.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eHigh-Visibility Handwheel:\u003c\/strong\u003e Equipped with a heavy-duty, red-enameled iron handwheel for rapid manual operation by contractors or fire personnel.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch2\u003eTechnical Specifications \u0026amp; Compliance Table\u003c\/h2\u003e\n\u003ctable\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eManufacturer \/ Brand\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003eNational Fire Products\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eModel \/ Series Number \/ SIN\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003eNFP120101 (Item #9645644)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eConnection \/ Thread Size \u0026amp; Type\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003e2-1\/2\" FNPT Inlet x 2-1\/2\" MNST Outlet\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003ePressure Rating (WWP \/ Max Working Pressure)\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003e300 PSI (Verify specific data sheet for exact rating)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eMaterial \/ Body Construction\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003eBrass \/ Bronze\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eAgency Listings \u0026amp; Approvals\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003ecULus Listed\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eApplicable NFPA Standards\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003eNFPA 13, NFPA 14, NFPA 25\u003c\/td\u003e \u003c\/tr\u003e\n\u003c\/table\u003e \u003cp\u003e\u003cstrong\u003eSubmittal \u0026amp; Installation Note:\u003c\/strong\u003e Always verify local Authority Having Jurisdiction (AHJ) requirements, thread types, and pressure restrictions prior to installation. Consult the engineering technical data cut sheet to ensure correct valve placement and pressure compatibility within your specific standpipe or fire suppression system design.\u003c\/p\u003e \u003c\/div\u003e","brand":"Viking","offers":[{"title":"Default Title","offer_id":46707883376888,"sku":"EB-46112765018360","price":153.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/7183\/3336\/files\/angle_hose_valve_2048_3.jpg?v=1792129269"},{"product_id":"tna-np-2-1-2-mnst-x-grooved-hose-valve-for-fire-safety","title":"TNA NP 2-1\/2 MNST X Grooved Hose Valve for Fire Safety","description":"\u003cdiv\u003e\n\u003cp\u003eThe TNA NP 2-1\/2 MNST X Grooved Hose Valve installs directly into commercial fire protection and standpipe systems to manage water flow during firefighting operations. Designed for professional and industrial fire safety applications, this valve provides critical control of the water supply when emergencies occur.\u003c\/p\u003e \u003cp\u003eThis valve integrates into standpipe and fire suppression piping networks to satisfy strict life safety assembly requirements outlined in NFPA 14 for standpipe systems and general water control guidelines under NFPA 13. Proper installation ensures code compliance and maintains reliable operational readiness for facility fire protection assets.\u003c\/p\u003e \u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eCorrosion-Resistant Build:\u003c\/strong\u003e Crafted from high-quality materials to resist wear and corrosion in harsh industrial environments.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eGrooved Connection:\u003c\/strong\u003e Features a grooved design that allows for quick installation to minimize system downtime.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003ePrecision Flow Control:\u003c\/strong\u003e Engineered components deliver efficient water supply management during active firefighting.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ctable\u003e \u003cthead\u003e \u003ctr\u003e \u003cth\u003e\u003cstrong\u003eTechnical Specification\u003c\/strong\u003e\u003c\/th\u003e \u003cth\u003e\u003cstrong\u003eValue\u003c\/strong\u003e\u003c\/th\u003e \u003c\/tr\u003e \u003c\/thead\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eManufacturer \/ Brand\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003eNational Fire Products (TNA)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eModel \/ Series Number \/ SIN\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003eNP 2-1\/2 MNST X Grooved Hose Valve\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eConnection \/ Thread Size \u0026amp; Type\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003e2-1\/2\" MNST x Grooved\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eMaterial \/ Body Construction\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003eCorrosion-resistant high-quality metal alloy\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eApplicable NFPA Standards\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003eNFPA 13, NFPA 14\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\n\u003c\/table\u003e \u003cp\u003eAlways verify local Authority Having Jurisdiction (AHJ) mandates and consult the manufacturer technical specifications before beginning installation on any fire suppression assembly.\u003c\/p\u003e \u003c\/div\u003e","brand":"Viking","offers":[{"title":"Default Title","offer_id":46707883475192,"sku":"EB-46097700815096","price":153.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/7183\/3336\/files\/tna-np-2-12-mnst-x-grooved-hose-valve-for-fire-safety-7425720.jpg?v=1776481896"},{"product_id":"fire-protection-reliable-water-control-hose-valves-fdc-rasco","title":"Fire Protection Reliable Water Control Hose Valves FDC RASCO","description":"\u003cdiv\u003e\n\u003cp\u003eThe Reliable RASCO Fire Department Connection (FDC) and water control accessories provide dependable auxiliary water inlet access and flow regulation for commercial, industrial, and residential fire protection systems. Engineered for installation in fire sprinkler and standpipe configurations, these components maintain operational integrity under high pressure to support emergency response operations.\u003c\/p\u003e \u003cp\u003eDesigned in compliance with standard fire protection requirements, this hardware satisfies critical code mandates for auxiliary fire department water supply connections as governed by NFPA 13 and NFPA 14. Storz technology integration allows emergency responders to establish quick, secure hose line couplings when every second counts during suppression activities.\u003c\/p\u003e \u003ch2\u003eKey Features \u0026amp; Construction\u003c\/h2\u003e\n\u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eStorz Connection Integration:\u003c\/strong\u003e Facilitates rapid, secure coupling for emergency fire department hoses to streamline response times.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eCorrosion-Resistant Build:\u003c\/strong\u003e Constructed from high-quality materials designed to withstand outdoor elements and maintain long-term reliability.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eOptimized Water Control:\u003c\/strong\u003e Engineered for consistent water flow and secure containment across diverse system configurations.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eVersatile Deployment:\u003c\/strong\u003e Suitable for a wide variety of commercial and industrial fire sprinkler assemblies and standpipe installations.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ctable\u003e \u003cthead\u003e \u003ctr\u003e \u003cth\u003e\u003cstrong\u003eTechnical Parameter\u003c\/strong\u003e\u003c\/th\u003e \u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e \u003c\/tr\u003e \u003c\/thead\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eManufacturer \/ Brand\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003eReliable Sprinkler (RASCO)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eModel \/ Series Number \/ SIN\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003eRASCO FDC \u0026amp; Water Control Line\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eConnection \/ Thread Size \u0026amp; Type\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003eStorz \/ Standard Fire Protection Threads\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eMaterial \/ Body Construction\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003eHigh-quality corrosion-resistant metal alloy\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eApplicable NFPA Standards\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003eNFPA 13, NFPA 14\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\n\u003c\/table\u003e \u003cp\u003eContractors must verify specific local Authority Having Jurisdiction (AHJ) mandates and consult the Reliable product catalog and list price book to confirm exact part numbers, technical specifications, and site installation requirements.\u003c\/p\u003e \u003c\/div\u003e","brand":"Reliable","offers":[{"title":"44STORZ30R","offer_id":48357152489720,"sku":"44STORZ30R","price":783.99,"currency_code":"USD","in_stock":true},{"title":"44STORZR","offer_id":48357152522488,"sku":"44STORZR","price":549.99,"currency_code":"USD","in_stock":true},{"title":"45STORZR","offer_id":48357152555256,"sku":"45STORZR","price":379.99,"currency_code":"USD","in_stock":true},{"title":"45STORZRKT","offer_id":48357152588024,"sku":"45STORZRKT","price":757.99,"currency_code":"USD","in_stock":true},{"title":"4STORZCAPR","offer_id":48357152620792,"sku":"4STORZCAPR","price":225.99,"currency_code":"USD","in_stock":true},{"title":"54STORZ30R","offer_id":48357152653560,"sku":"54STORZ30R","price":1061.99,"currency_code":"USD","in_stock":true},{"title":"5STORZCAPR","offer_id":48357152686328,"sku":"5STORZCAPR","price":376.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/7183\/3336\/files\/fire-protection-reliable-water-control-hose-valves-fdc-rasco-3125646.jpg?v=1778906919"},{"product_id":"brecco-fire-hose-valve-cap-and-chain-ul-fm-listed","title":"BRECCO Fire Hose Valve Cap and Chain UL\/FM Listed","description":"\u003cdiv\u003e\u003cdiv\u003e\n\u003cp\u003eThe BRECCO Fire Hose Valve is engineered for robust performance in commercial, industrial, and residential standpipe systems, providing critical water flow management during fire suppression efforts. It installs directly into standpipe assemblies to control water distribution to fire hoses and hydrants, operating dependably under demanding conditions.\u003c\/p\u003e\n\u003cp\u003eThis valve is designed to satisfy the strict regulatory and safety requirements governing life-safety installations. It carries official certifications to ensure compliance with building codes and fire protection standards for commercial and municipal properties.\u003c\/p\u003e \u003ch2\u003eKey Features \u0026amp; Construction\u003c\/h2\u003e\n\u003cul\u003e \u003cli\u003e\n\u003cb\u003eHigh-Strength Brass Construction:\u003c\/b\u003e Crafted from durable brass to resist corrosion and wear, ensuring exceptional structural integrity in indoor and outdoor environments.\u003c\/li\u003e \u003cli\u003e\n\u003cb\u003eStandard 2 1\/2\" Connection:\u003c\/b\u003e Features a standard 2 1\/2-inch male threaded outlet for secure connections with standard fire hoses and firefighting equipment.\u003c\/li\u003e \u003cli\u003e\n\u003cb\u003eErgonomic Red Handwheel Control:\u003c\/b\u003e Allows for smooth, manual operation to enable quick opening and closing of water flow during emergency responses.\u003c\/li\u003e \u003cli\u003e\n\u003cb\u003ePrecision-Engineered Threads:\u003c\/b\u003e Delivers tight, leak-free connections to maintain system pressure and prevent water loss.\u003c\/li\u003e \u003cli\u003e\n\u003cb\u003eIntegrated Flow Direction Indicator:\u003c\/b\u003e Includes a clear arrow marking on the valve body to simplify installation and ensure correct functionality.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch2\u003eTechnical Specifications \u0026amp; Compliance Table\u003c\/h2\u003e\n\u003ctable\u003e \u003ctr\u003e \u003ctd\u003e\u003cb\u003eManufacturer \/ Brand\u003c\/b\u003e\u003c\/td\u003e \u003ctd\u003eReliable \/ BRECCO\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cb\u003eConnection \/ Thread Size \u0026amp; Type\u003c\/b\u003e\u003c\/td\u003e \u003ctd\u003e2 1\/2\" Male Threaded Outlet\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cb\u003eMaterial \/ Body Construction\u003c\/b\u003e\u003c\/td\u003e \u003ctd\u003eBrass\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cb\u003eAgency Listings \u0026amp; Approvals\u003c\/b\u003e\u003c\/td\u003e \u003ctd\u003eUL Listed, FM Approved\u003c\/td\u003e \u003c\/tr\u003e \u003c\/table\u003e \u003ch2\u003eSubmittal \u0026amp; Installation Note\u003c\/h2\u003e\n\u003cp\u003eVerify local Authority Having Jurisdiction (AHJ) requirements prior to installation. Consult the Reliable product catalog and list price book for complete technical data sheets and system requirements.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/div\u003e","brand":"Reliable","offers":[{"title":"15HVCB","offer_id":48380187410680,"sku":"15HVCB","price":99.99,"currency_code":"USD","in_stock":true},{"title":"15AHVB","offer_id":48380187443448,"sku":"15AHVB","price":271.99,"currency_code":"USD","in_stock":true},{"title":"25HVCB","offer_id":48380187476216,"sku":"25HVCB","price":174.99,"currency_code":"USD","in_stock":true},{"title":"25AHVB","offer_id":48380187508984,"sku":"25AHVB","price":483.99,"currency_code":"USD","in_stock":true},{"title":"2515HVRB","offer_id":48380187541752,"sku":"2515HVRB","price":199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/7183\/3336\/files\/BRECCOFireHoseValveCapandChainULFMListed.jpg?v=1787887611"},{"product_id":"fire-department-connection-brecco-fdc-rapid-supply-parts","title":"Fire Department Connection BRECCO FDC Rapid Supply Parts","description":"\u003cdiv\u003e\n\u003cp\u003eThe BRECCO FDC Rapid Supply serves as an essential Fire Department Connection, creating a reliable and direct link between external municipal fire water resources and internal commercial, industrial, or residential fire suppression systems. Installed on the exterior of a building to feed standpipe or sprinkler networks, this assembly ensures swift and efficient water delivery during critical firefighting emergencies. Built with integral clapper valves, the unit actively prevents reverse water flow and blocks the ingress of debris to preserve the ongoing operational readiness and pressure integrity of the fire protection layout.\u003c\/p\u003e \u003cp\u003eThis connection satisfies mandatory life safety design criteria by facilitating rapid, standardized hook-ups for municipal fire hoses, drastically reducing emergency response times. It complies with strict industry standards and code requirements for modern fire protection system layouts, ensuring absolute regulatory compliance and dependable performance during high-demand incidents.\u003c\/p\u003e \u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eDurable Construction:\u003c\/strong\u003e Crafted from high-grade, resilient materials designed to endure harsh outdoor environmental conditions and continuous exposure.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eIntegral Clapper Valves:\u003c\/strong\u003e Features built-in clapper valves that prevent reverse water flow and protect internal components from debris ingress.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eSecure Joint Integrity:\u003c\/strong\u003e Engineered to maintain a tight, leak-resistant seal that holds optimal system pressure during active water delivery.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eStandardized Compatibility:\u003c\/strong\u003e Equipped with industry-standard inlets to enable fast, secure hook-ups with fire department supply hoses.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eCorrosion-Resistant Finish:\u003c\/strong\u003e Features a protective outdoor coating that actively resists rust and environmental degradation over years of service.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eStreamlined Installation:\u003c\/strong\u003e Simplifies the pipe joining process to reduce project timelines, lower labor needs, and eliminate hot work permit risks.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ctable\u003e \u003cthead\u003e \u003ctr\u003e \u003cth\u003e\u003cb\u003eTechnical Parameter\u003c\/b\u003e\u003c\/th\u003e \u003cth\u003e\u003cb\u003eSpecification\u003c\/b\u003e\u003c\/th\u003e \u003c\/tr\u003e \u003c\/thead\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eManufacturer \/ Brand\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003eReliable Sprinkler (BRECCO)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eModel \/ Series Number \/ SIN\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003eBRECCO FDC Rapid Supply\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eConnection \/ Thread Size \u0026amp; Type\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003eStandardized Fire Department Inlets\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eMaterial \/ Body Construction\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003eHigh-grade, resilient materials with corrosion-resistant finish\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\n\u003c\/table\u003e \u003cp\u003eContractors and facility managers must verify local Authority Having Jurisdiction (AHJ) requirements and consult the official Reliable product catalog and list price book to confirm precise part numbers, engineering specifications, and site-specific installation mandates prior to assembly.\u003c\/p\u003e \u003c\/div\u003e","brand":"Reliable","offers":[{"title":"ABCB","offer_id":48380267626744,"sku":"ABCB","price":19.99,"currency_code":"USD","in_stock":true},{"title":"FDC15B","offer_id":48380267659512,"sku":"FDC15B","price":190.99,"currency_code":"USD","in_stock":true},{"title":"FDC25B","offer_id":48380267692280,"sku":"FDC25B","price":434.99,"currency_code":"USD","in_stock":true},{"title":"FDC42590B","offer_id":48380267725048,"sku":"FDC42590B","price":550.99,"currency_code":"USD","in_stock":true},{"title":"FDC425B","offer_id":48380267757816,"sku":"FDC425B","price":501.99,"currency_code":"USD","in_stock":true},{"title":"PBCB","offer_id":48380267790584,"sku":"PBCB","price":7.99,"currency_code":"USD","in_stock":true},{"title":"WPBB","offer_id":48380267823352,"sku":"WPBB","price":56.99,"currency_code":"USD","in_stock":true},{"title":"45STORZ30B","offer_id":48380267856120,"sku":"45STORZ30B","price":1204.99,"currency_code":"USD","in_stock":true},{"title":"44STORZB","offer_id":48380267888888,"sku":"44STORZB","price":593.99,"currency_code":"USD","in_stock":true},{"title":"44STORZ30B","offer_id":48380267921656,"sku":"44STORZ30B","price":903.99,"currency_code":"USD","in_stock":true},{"title":"09508B","offer_id":48380267954424,"sku":"09508B","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/7183\/3336\/files\/fire-department-connection-brecco-fdc-rapid-supply-5407762.jpg?v=1778955036"},{"product_id":"fppi-brass-fire-hose-valves-fdc-reliable-protection-pro","title":"FPPI Brass Fire Hose Valves FDC | Reliable Protection Pro","description":"\u003cdiv\u003e\n\u003cp\u003eFortify your commercial or industrial fire protection infrastructure with FPPI Brass Fire Hose Valves and Fire Department Connections (FDCs). These professional-grade components integrate directly into standpipe and fire sprinkler systems, establishing robust, code-compliant auxiliary water supply connections for emergency responder apparatus. Engineered for unyielding performance, this equipment guarantees dependable flow control and rapid access when emergency services tie into internal building networks.\u003c\/p\u003e \u003cp\u003eAdhering to strict life safety standards, these components satisfy local fire safety regulations and assist facilities in meeting compliance mandates under NFPA 13 and NFPA 14 for commercial fire suppression and standpipe systems. By providing durable access points and precise flow control, this hardware ensures operational readiness and satisfies AHJ expectations across commercial, industrial, and multi-residential properties.\u003c\/p\u003e \u003cul\u003e \u003cli\u003e\n\u003cb\u003eDurable Brass Construction:\u003c\/b\u003e Crafted from high-grade brass to provide exceptional resistance against corrosion and demanding fire protection environments.\u003c\/li\u003e \u003cli\u003e\n\u003cb\u003eVersatile Valve Options:\u003c\/b\u003e Includes angle and straightway hose valve configurations for precise flow control and quick emergency access.\u003c\/li\u003e \u003cli\u003e\n\u003cb\u003eFDC Water Integration:\u003c\/b\u003e Facilitates seamless auxiliary water supply from fire apparatus directly into internal building sprinkler and standpipe systems.\u003c\/li\u003e \u003cli\u003e\n\u003cb\u003eComplete Accessory Suite:\u003c\/b\u003e Ships with vital system accessories including protective caps, plugs, clear identification plates, and specialized wrenches.\u003c\/li\u003e \u003cli\u003e\n\u003cb\u003eReliable Quality Assurance:\u003c\/b\u003e Manufactured by FPPI to stringent industry standards for dependable operation and reduced long-term maintenance requirements.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ctable\u003e \u003cthead\u003e \u003ctr\u003e \u003cth\u003e\u003cb\u003eSpecification Field\u003c\/b\u003e\u003c\/th\u003e \u003cth\u003e\u003cb\u003eProduct Detail\u003c\/b\u003e\u003c\/th\u003e \u003c\/tr\u003e \u003c\/thead\u003e\n\u003ctbody\u003e \u003ctr\u003e \u003ctd\u003e\u003cb\u003eManufacturer \/ Brand\u003c\/b\u003e\u003c\/td\u003e \u003ctd\u003eFPPI (Reliable Sprinkler Vendor)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cb\u003eModel \/ Series Number \/ SIN\u003c\/b\u003e\u003c\/td\u003e \u003ctd\u003eBrass Fire Hose Valves \u0026amp; FDC Series\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cb\u003eMaterial \/ Body Construction\u003c\/b\u003e\u003c\/td\u003e \u003ctd\u003eHigh-Grade Brass\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cb\u003eApplicable NFPA Standards\u003c\/b\u003e\u003c\/td\u003e \u003ctd\u003eNFPA 13, NFPA 14\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\n\u003c\/table\u003e \u003cp\u003eVerify all local Authority Having Jurisdiction (AHJ) requirements and consult the official Reliable product catalog and list price book to confirm exact part numbers, specifications, and installation mandates prior to job site deployment.\u003c\/p\u003e \u003c\/div\u003e","brand":"Reliable","offers":[{"title":"PBC","offer_id":48381446848760,"sku":"PBC","price":8.99,"currency_code":"USD","in_stock":true},{"title":"FDC42590","offer_id":48381446881528,"sku":"FDC42590","price":486.99,"currency_code":"USD","in_stock":true},{"title":"FDC425","offer_id":48381446914296,"sku":"FDC425","price":407.99,"currency_code":"USD","in_stock":true},{"title":"FDC25","offer_id":48381446947064,"sku":"FDC25","price":396.99,"currency_code":"USD","in_stock":true},{"title":"FDC15","offer_id":48381446979832,"sku":"FDC15","price":207.99,"currency_code":"USD","in_stock":true},{"title":"ABC","offer_id":48381447012600,"sku":"ABC","price":18.99,"currency_code":"USD","in_stock":true},{"title":"75BD","offer_id":48381447045368,"sku":"75BD","price":73.99,"currency_code":"USD","in_stock":true},{"title":"5STORZCAP","offer_id":48381447078136,"sku":"5STORZCAP","price":596.99,"currency_code":"USD","in_stock":true},{"title":"5BD","offer_id":48381447110904,"sku":"5BD","price":50.99,"currency_code":"USD","in_stock":true},{"title":"4STORZCAP","offer_id":48381447143672,"sku":"4STORZCAP","price":409.99,"currency_code":"USD","in_stock":true},{"title":"45STORZFP","offer_id":48381447176440,"sku":"45STORZFP","price":759.99,"currency_code":"USD","in_stock":true},{"title":"44STORZ30","offer_id":48381447209208,"sku":"44STORZ30","price":795.99,"currency_code":"USD","in_stock":true},{"title":"25HVC","offer_id":48381447241976,"sku":"25HVC","price":57.99,"currency_code":"USD","in_stock":true},{"title":"25FDCP","offer_id":48381447274744,"sku":"25FDCP","price":105.99,"currency_code":"USD","in_stock":true},{"title":"25FAHV","offer_id":48381447307512,"sku":"25FAHV","price":455.99,"currency_code":"USD","in_stock":true},{"title":"25AHV","offer_id":48381447340280,"sku":"25AHV","price":441.99,"currency_code":"USD","in_stock":true},{"title":"2515HVR","offer_id":48381447373048,"sku":"2515HVR","price":73.99,"currency_code":"USD","in_stock":true},{"title":"1TD","offer_id":48381447405816,"sku":"1TD","price":492.99,"currency_code":"USD","in_stock":true},{"title":"15HVC","offer_id":48381447438584,"sku":"15HVC","price":40.99,"currency_code":"USD","in_stock":true},{"title":"15FAHV","offer_id":48381447471352,"sku":"15FAHV","price":249.99,"currency_code":"USD","in_stock":true},{"title":"15AHV","offer_id":48381447504120,"sku":"15AHV","price":249.99,"currency_code":"USD","in_stock":true},{"title":"125TD","offer_id":48381447536888,"sku":"125TD","price":625.99,"currency_code":"USD","in_stock":true},{"title":"09508","offer_id":48381447569656,"sku":"09508","price":33.99,"currency_code":"USD","in_stock":true},{"title":"Standard","offer_id":48381447602424,"sku":"44STORZ","price":501.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/7183\/3336\/files\/fppi-brass-fire-hose-valves-fdc-reliable-protection-pro-6975591.jpg?v=1778906948"},{"product_id":"fire-protection-rasco-hose-valve-fdc-building-safety","title":"Fire Protection RASCO Hose Valve FDC Building Safety","description":"\u003cdiv\u003e\n\u003cp\u003eReliable RASCO Hose Valves, Accessories, and Fire Department Connections (FDCs) are engineered for dependable performance within commercial, industrial, and high-rise residential fire protection networks. These components integrate directly into standpipe and sprinkler systems to facilitate vital water supply connections and precise pressure control during manual firefighting operations. FDCs allow first responders to rapidly supplement building water supplies and boost pressure for upper floors when primary sources are compromised.\u003c\/p\u003e \u003cp\u003eManufactured to satisfy rigorous industry compliance requirements, these components support adherence to \u003cstrong\u003eNFPA 13\u003c\/strong\u003e for standard sprinkler installations and \u003cstrong\u003eNFPA 14\u003c\/strong\u003e for standpipe and hose systems. This compliance ensures regulatory alignment, simplifies AHJ inspections, and maintains the operational readiness of your facility's life safety infrastructure.\u003c\/p\u003e \u003ch2\u003eKey Features \u0026amp; Construction\u003c\/h2\u003e\n\u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eDurable Body Materials:\u003c\/strong\u003e Constructed from high-strength forged brass and ductile iron to resist corrosion and endure high-stress operational environments.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eOptimized Water Delivery:\u003c\/strong\u003e Provides reliable flow control and secure connection points for fire professionals executing manual suppression.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eComplete Access Accessories:\u003c\/strong\u003e Includes robust protective caps, secure chains, and smooth swivels to prevent debris accumulation and vandalism.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eRapid Identification:\u003c\/strong\u003e Features strategic placement and clear physical configuration for immediate accessibility by first responders.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch2\u003eTechnical Specifications \u0026amp; Compliance Table\u003c\/h2\u003e\n\u003ctable\u003e \u003cthead\u003e \u003ctr\u003e \u003cth\u003e\u003cstrong\u003eSpecification Parameter\u003c\/strong\u003e\u003c\/th\u003e \u003cth\u003e\u003cstrong\u003eTechnical Detail\u003c\/strong\u003e\u003c\/th\u003e \u003c\/tr\u003e \u003c\/thead\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eManufacturer \/ Brand\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003eReliable Sprinkler (RASCO)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eModel \/ Series Number \/ SIN\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003eHose Valve \/ FDC Series\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eMaterial \/ Body Construction\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003eForged Brass, Ductile Iron\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eAgency Listings \u0026amp; Approvals\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003eUL Listed, FM Approved\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eApplicable NFPA Standards\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003eNFPA 13, NFPA 14\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\n\u003c\/table\u003e \u003cp\u003eContractors and facility managers must verify all local Authority Having Jurisdiction (AHJ) mandates and cross-reference system layouts prior to equipment placement. Consult the Reliable product catalog and list price book for complete part numbering, exact thread sizing, and certified technical cut sheets before finalizing system design and installation.\u003c\/p\u003e \u003c\/div\u003e","brand":"Reliable","offers":[{"title":"WPR","offer_id":48381509239032,"sku":"WPR","price":45.99,"currency_code":"USD","in_stock":true},{"title":"WPBR","offer_id":48381509271800,"sku":"WPBR","price":139.99,"currency_code":"USD","in_stock":true},{"title":"WP25R","offer_id":48381509304568,"sku":"WP25R","price":85.99,"currency_code":"USD","in_stock":true},{"title":"PBCR","offer_id":48381509337336,"sku":"PBCR","price":6.99,"currency_code":"USD","in_stock":true},{"title":"FDCR","offer_id":48381509370104,"sku":"FDCR","price":316.99,"currency_code":"USD","in_stock":true},{"title":"EOPR","offer_id":48381509402872,"sku":"EOPR","price":16.99,"currency_code":"USD","in_stock":true},{"title":"90FDCR","offer_id":48381509435640,"sku":"90FDCR","price":355.99,"currency_code":"USD","in_stock":true},{"title":"25WPR","offer_id":48381509468408,"sku":"25WPR","price":34.99,"currency_code":"USD","in_stock":true},{"title":"25RHVC","offer_id":48381509501176,"sku":"25RHVC","price":52.99,"currency_code":"USD","in_stock":true},{"title":"25RAHVG","offer_id":48381509533944,"sku":"25RAHVG","price":372.99,"currency_code":"USD","in_stock":true},{"title":"25RAHV","offer_id":48381509566712,"sku":"25RAHV","price":347.99,"currency_code":"USD","in_stock":true},{"title":"25PLUGR","offer_id":48381509599480,"sku":"25PLUGR","price":48.99,"currency_code":"USD","in_stock":true},{"title":"25FDCR","offer_id":48381509632248,"sku":"25FDCR","price":302.99,"currency_code":"USD","in_stock":true},{"title":"2515HVRR","offer_id":48381509665016,"sku":"2515HVRR","price":43.99,"currency_code":"USD","in_stock":true},{"title":"15RHVC","offer_id":48381509697784,"sku":"15RHVC","price":42.99,"currency_code":"USD","in_stock":true},{"title":"15RAHV","offer_id":48381509730552,"sku":"15RAHV","price":217.99,"currency_code":"USD","in_stock":true},{"title":"15FDCR","offer_id":48381509763320,"sku":"15FDCR","price":136.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/7183\/3336\/files\/fire-protection-rasco-hose-valve-fdc-building-safety-4932897.jpg?v=1778906950"},{"product_id":"fire-protection-cap-chain-nst-brass-for-professionals-fppi","title":"FPPI Caps and Plugs with Chains, Brass and Aluminum Options","description":"\u003cdiv\u003e\n\u003cp\u003eThis listing combines FPPI caps and a plug with chains. Material, connection type and thread vary by the selected part:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e07-250: 2½-inch NST brass cap.\u003c\/li\u003e\n\u003cli\u003e07-270: 1½-inch NST brass cap.\u003c\/li\u003e\n\u003cli\u003e07-253: 2½-inch NYFD brass cap.\u003c\/li\u003e\n\u003cli\u003e07-258: 2½-inch PHX brass cap.\u003c\/li\u003e\n\u003cli\u003e07-340: 2½-inch NST aluminum plug.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eChoose the exact part required. The aluminum plug is not a brass cap, and regional thread options are not all NST. Confirm the mating connection and application before ordering.\u003c\/p\u003e\n\u003ctable\u003e \u003ctr\u003e \u003ctd\u003e\u003cb\u003eManufacturer \/ Brand\u003c\/b\u003e\u003c\/td\u003e \u003ctd\u003eFire Protection Products Inc (FPPI)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cb\u003eModel \/ Series Number \/ SIN\u003c\/b\u003e\u003c\/td\u003e \u003ctd\u003eFPPI caps and plug with chains; exact part varies by option.\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cb\u003eConnection \/ Thread Size \u0026amp; Type\u003c\/b\u003e\u003c\/td\u003e \u003ctd\u003eNST, NYFD or PHX according to selected part; cap\/plug configuration varies.\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cb\u003eMaterial \/ Body Construction\u003c\/b\u003e\u003c\/td\u003e \u003ctd\u003eB124 Brass Alloy \/ Aluminum\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cb\u003eAgency Listings \u0026amp; Approvals\u003c\/b\u003e\u003c\/td\u003e \u003ctd\u003eRefer to the manufacturer’s current part-specific documentation.\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cb\u003eApplicable NFPA Standards\u003c\/b\u003e\u003c\/td\u003e \u003ctd\u003eFollow the manufacturer’s installation instructions and applicable project requirements.\u003c\/td\u003e \u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"Fire Protection Products Inc","offers":[{"title":"2.5\" \/ NST Brass","offer_id":48563788644600,"sku":"07-250","price":21.99,"currency_code":"USD","in_stock":true},{"title":"2.5\" \/ PHX Brass","offer_id":48563788677368,"sku":"07-258","price":30.99,"currency_code":"USD","in_stock":true},{"title":"2.5\" \/ NYFD Brass","offer_id":48563788710136,"sku":"07-253","price":22.99,"currency_code":"USD","in_stock":true},{"title":"2.5\" \/ NST Aluminum","offer_id":48563788742904,"sku":"07-340","price":37.99,"currency_code":"USD","in_stock":true},{"title":"1.5\" \/ NST Brass","offer_id":48563788775672,"sku":"07-270","price":15.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/7183\/3336\/files\/capchn-212-pl-nst-rb-306662.png?v=1776006681"},{"product_id":"212-prv-chrome-wcapch-zw5000ccch","title":"21\/2\" PRV Chrome W\/Cap\u0026CH","description":"\u003cp\u003eZurn Wilkins ZW5000CCCH is the chrome 2-1\/2-inch Pressure-Tru pressure-reducing hose valve cataloged with cap and chain.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eConfiguration\u003c\/b\u003e: The exact item specifies chrome finish with cap and chain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePressure control\u003c\/b\u003e: The ZW5000 family description identifies regulation in flowing and non-flowing conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAdjustment\u003c\/b\u003e: The supplier describes the family as field adjustable.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe complete suffix distinguishes this finished accessory configuration from the base valve. Confirm connection threads, adjustment procedure, inlet conditions and required installation details before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eRetained table clarification\u003c\/b\u003e: The legacy table below is preserved for reference. Broader material, performance, compatibility and approval claims in it are not verified by the exact supplier record and must not be treated as confirmed specifications; use the verified details above and current manufacturer documentation.\u003c\/p\u003e\u003ctable\u003e \u003cthead\u003e \u003ctr\u003e \u003cth\u003e\u003cstrong\u003eTechnical Specification\u003c\/strong\u003e\u003c\/th\u003e \u003cth\u003e\u003cstrong\u003eDetails\u003c\/strong\u003e\u003c\/th\u003e \u003c\/tr\u003e \u003c\/thead\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eManufacturer \/ Brand\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003eZurn Wilkins\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eModel \/ Series Number \/ SIN\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003eZW5000 \/ Pressure-Tru® Series\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eConnection \/ Thread Size \u0026amp; Type\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003e2-1\/2\"\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eMaterial \/ Body Construction\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003eDuctile Iron\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eAgency Listings \u0026amp; Approvals\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003eUL Listed, FM Approved\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eApplicable NFPA Standards\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003eNFPA Standpipe and Hose Systems\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003ca href=\"https:\/\/vsncatalog.supplynet.com\/configure\/ZW5000CCCH\"\u003eSupplyNet exact ZW5000CCCH item reference\u003c\/a\u003e\u003c\/p\u003e","brand":"Zurn Wilkins","offers":[{"title":"Default Title","offer_id":48563885900024,"sku":"ZW5000CCCH","price":1315.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/7183\/3336\/files\/2-12-prv-globe-grv-inlet-pressure-reducing-valve-3830576.jpg?v=1775620896"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/7183\/3336\/collections\/fire-hose-equipment-connect-contain-conquer-fire-8127025.png?v=1780310457","url":"https:\/\/fireprotectionparts.net\/collections\/hose-equipment.oembed?page=5","provider":"Fire Protection Parts","version":"1.0","type":"link"}