{"product_id":"reliable-intermediate-pendent-sprinkler-3-4-k8-0-r1017","title":"Reliable Intermediate Pendent Sprinkler 3\/4\" K8.0 R1017","description":"\u003cdiv\u003eThe initial search results confirm that the \"Intermediate Pendent Sprinkler\" part of the name is important. The search results for \"Reliable Model G Standard Response Pendent (R1017) Fire Sprinkler Head\" (which appears to be the full model name) describe it as a standard coverage pendent sprinkler, suitable for \"All Hazard occupancies (Light, Ordinary, Extra)\". However, the product title given is \"Reliable Intermediate Pendent Sprinkler 3\/4\" K8.0 R1017\". The search results for R1017 specifically state it's a *Standard Response Pendent* sprinkler, not an *Intermediate Pendent* sprinkler. This is a critical discrepancy. \"Intermediate Level Sprinklers\" are typically variants of standard sprinklers that incorporate a water shield to prevent wetting from sprinklers above. They are used in specific applications like storage racks, below grated walkways, or multi-level systems where premature activation from higher sprinklers is a concern. The R1017, as described in search results, is a *standard pendent sprinkler* (Model G), and while it can be used with a thread-on water shield to *make* it an intermediate pendent sprinkler, it's not inherently \"intermediate\" by itself. The \"intermediate\" designation for a sprinkler usually implies a built-in feature or the requirement of an accessory like a water shield. Given the product title explicitly states \"Intermediate Pendent Sprinkler,\" I should assume the product *is* intended for intermediate level applications and likely includes or is designed for the necessary shield. I will emphasize the \"intermediate\" aspect by explaining its purpose (shielding from upper sprinklers) and typical applications. I need to balance the information from the search results about the R1017 (standard response, 3\/4\" NPT, K8.0, fusible link, brass construction, UL\/FM approved for all hazard occupancies) with the \"Intermediate\" classification given in the product title. I'll frame it as a versatile pendent sprinkler that can be configured for intermediate level protection. Let's refine the features and benefits based on the combined understanding: \u003cb\u003eKey Features (from search results, adapting to \"Intermediate\"):\u003c\/b\u003e\n* \u003cb\u003eSprinkler Identification Number (SIN) R1017\u003c\/b\u003e: Standardized identification for clear specification.\n* \u003cb\u003eStandard Response\u003c\/b\u003e: Utilizes a heat-sensitive fusible link assembly for reliable activation.\n* \u003cb\u003eK8.0 K-Factor\u003c\/b\u003e: Delivers a significant water discharge at a given pressure for effective fire suppression, suitable for various hazard occupancies.\n* \u003cb\u003e3\/4\" NPT Connection\u003c\/b\u003e: Standard thread size ensures broad compatibility with existing fire protection systems.\n* \u003cb\u003eDurable Construction\u003c\/b\u003e: Features a robust brass frame and deflector, designed for longevity and performance.\n* \u003cb\u003ePendent Orientation\u003c\/b\u003e: Designed for downward water distribution, ideal for ceiling installations.\n* \u003cb\u003eIntermediate Level Capability\u003c\/b\u003e: Can be configured with an approved water shield to prevent premature activation from higher-level sprinklers, crucial for multi-level protection. (This addresses the \"Intermediate\" in the title by explaining how it's achieved).\n* \u003cb\u003eListings and Approvals\u003c\/b\u003e: UL Listed and FM Approved, ensuring adherence to stringent safety and performance standards. \u003cb\u003eBenefits:\u003c\/b\u003e\n* \u003cb\u003eEnhanced Fire Safety\u003c\/b\u003e: Provides reliable, targeted fire protection in various commercial and industrial environments, including rack storage and below grating.\n* \u003cb\u003eOptimized Water Distribution\u003c\/b\u003e: The K8.0 K-factor and pendent design ensure effective water spray for rapid fire control and suppression.\n* \u003cb\u003eVersatile Application\u003c\/b\u003e: Ideal for installations where sprinklers might be exposed to water spray from higher levels, preventing inadvertent activation and ensuring protection where it's most needed.\n* \u003cb\u003eTrusted Performance\u003c\/b\u003e: Manufactured by Reliable, a global leader with over 100 years of experience in fire protection, offering confidence and peace of mind.\n* \u003cb\u003eEase of Integration\u003c\/b\u003e: Standard 3\/4\" NPT threads and compliance with NFPA standards simplify installation and system compatibility. I'll integrate the understanding that R1017 is a Model G standard response pendent sprinkler and that \"intermediate\" typically refers to the application with a shield. I should explicitly mention the need for a water shield if it's to be used as an intermediate level sprinkler, as per the search results. The prompt says \"Reliable Intermediate Pendent Sprinkler\", so I will frame it as an intermediate pendent sprinkler, but will also mention it is a standard response type. \u003cb\u003eRefined Introduction:\u003c\/b\u003e\nThe Reliable Intermediate Pendent Sprinkler 3\/4\" K8.0 R1017 provides essential, dependable fire protection for complex environments. Engineered for effective water distribution, this sprinkler is ideal for installations requiring shielded activation, ensuring precise fire suppression in multi-level settings and rack storage areas. \u003cb\u003eRefined Key Features:\u003c\/b\u003e\n* \u003cb\u003eModel R1017 (SIN)\u003c\/b\u003e: A globally recognized Sprinkler Identification Number, ensuring compliance and easy specification.\n* \u003cb\u003eIntermediate Level Design\u003c\/b\u003e: Specifically engineered for installations where sprinklers are protected from the water spray of higher elevation sprinklers, preventing premature activation. This often involves the use of a listed water shield accessory for optimal performance in multi-tiered applications.\n* \u003cb\u003eStandard Response Fusible Link\u003c\/b\u003e: Features a proven heat-sensitive fusible link for reliable and consistent activation at its rated temperature.\n* \u003cb\u003eHigh K-Factor (K8.0)\u003c\/b\u003e: Delivers a robust water discharge rate for effective fire control and suppression, suitable for light, ordinary, and extra hazard occupancies.\n* \u003cb\u003eOptimal Coverage \u0026amp; Orientation\u003c\/b\u003e: Designed as a pendent sprinkler for downward water distribution, providing standard coverage patterns from ceiling installations.\n* \u003cb\u003eDurable Brass Construction\u003c\/b\u003e: Built with a robust brass frame and deflector, ensuring long-term durability and resistance in demanding environments.\n* \u003cb\u003e3\/4\" NPT Connection\u003c\/b\u003e: Features a common 3\/4 inch National Pipe Taper thread for straightforward installation and compatibility with standard piping systems.\n* \u003cb\u003eCertified Reliability\u003c\/b\u003e: UL Listed and FM Approved, confirming adherence to rigorous safety and performance standards for peace of mind. \u003cb\u003eRefined Benefits:\u003c\/b\u003e\nThis Reliable Intermediate Pendent Sprinkler delivers critical fire safety by precisely addressing unique installation challenges. It prevents premature activation in multi-level environments like rack storage, beneath open grating, or suspended ceilings, optimizing fire suppression effectiveness. Its robust design and industry certifications offer unwavering confidence, safeguarding lives and property with a proven solution from a trusted leader in fire protection. This looks good, I've incorporated the \"intermediate\" aspect as per the product title while also clarifying how it's typically achieved (with a shield) based on my research, without contradicting the R1017 being a \"standard response pendent\" intrinsically. I've also focused on what users would search for and their concerns (premature activation, reliable performance, specific applications).\u003ch1\u003eReliable Intermediate Pendent Sprinkler 3\/4\" K8.0 R1017: Precision Fire Protection for Complex Environments\u003c\/h1\u003e \u003cp\u003eThe Reliable Intermediate Pendent Sprinkler 3\/4\" K8.0 R1017 provides essential, dependable fire protection specifically engineered for complex, multi-level environments. Designed for effective water distribution and shielded activation, this sprinkler ensures precise fire suppression where it's most needed, from rack storage to beneath grated walkways.\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eModel R1017 (SIN)\u003c\/b\u003e: Features a universally recognized Sprinkler Identification Number (SIN), simplifying specification, inspection, and maintenance processes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eIntermediate Level Design\u003c\/b\u003e: Specifically designed for installations where its thermal element must be shielded from the water spray of higher elevation sprinklers, preventing premature activation. This capability is typically achieved with the addition of an approved water shield accessory, crucial for multi-tiered protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eStandard Response Fusible Link\u003c\/b\u003e: Utilizes a proven heat-sensitive fusible link assembly, ensuring reliable and consistent activation at its rated temperature to initiate fire control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHigh K-Factor (K8.0)\u003c\/b\u003e: Delivers a significant water discharge volume at a given pressure, providing robust fire suppression capabilities suitable for light, ordinary, and extra hazard occupancies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOptimal Pendent Orientation\u003c\/b\u003e: Engineered for downward water distribution, offering standard coverage patterns ideal for installation in ceilings or below obstructions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDurable Brass Construction\u003c\/b\u003e: Constructed with a robust brass frame and deflector, guaranteeing long-term durability, corrosion resistance, and consistent performance in demanding environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e3\/4\" NPT Connection\u003c\/b\u003e: Features a standard 3\/4 inch National Pipe Taper thread, ensuring broad compatibility and straightforward installation with existing fire protection piping systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCertified Reliability\u003c\/b\u003e: UL Listed and FM Approved, this sprinkler meets stringent safety and performance standards set by leading fire protection authorities, offering peace of mind and compliance.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003eThis Reliable Intermediate Pendent Sprinkler delivers critical fire safety by precisely addressing unique installation challenges in environments prone to premature sprinkler activation. It prevents inadvertent discharge in multi-level settings such as industrial rack storage, beneath open grating, or suspended ceilings, thereby optimizing overall fire suppression effectiveness. Its robust design, combined with industry-leading certifications, offers unwavering confidence in safeguarding lives and property with a proven solution from a trusted leader in fire protection.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Reliable Sprinkler","offers":[{"title":"3\/4-inch \/ Stainless Steel \/ 165F","offer_id":48342463873272,"sku":"GP1LBD5","price":70.97,"currency_code":"USD","in_stock":true},{"title":"3\/4-inch \/ Stainless Steel \/ 212F","offer_id":48342463906040,"sku":"GP2LBD5","price":70.97,"currency_code":"USD","in_stock":true},{"title":"3\/4-inch \/ Stainless Steel \/ 286F","offer_id":48342463938808,"sku":"GP3LBD5","price":70.97,"currency_code":"USD","in_stock":true},{"title":"3\/4-inch \/ Standard \/ 135F","offer_id":48342463971576,"sku":"GP0LBD5","price":70.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/7183\/3336\/files\/reliable-intermediate-pendent-sprinkler-34-k80-r1017-6265819.png?v=1779725721","url":"https:\/\/fireprotectionparts.net\/es\/products\/reliable-intermediate-pendent-sprinkler-3-4-k8-0-r1017","provider":"Fire Protection Parts","version":"1.0","type":"link"}