1/2" AF777 SWIVEL ATTACHMENT

Size Range:3/8" through 1/2" rod

Material:Carbon Steel

Finish:Electro-Galvanized per ASTM B633

Hanger Service:Swivel hanger designed to support horizontal piping from angled structures. Listed for installation at angles between 0 and 90 degrees.

Restraint Service:May be installed as a branch line restraint per the requirements of NFPA 13. The AF777 may be installed directly to the structure or to the Fig. AF779.

Approvals:cULus Listed (UL 203 and UL 203a – 3/8" only). Complies with the hanging and restraint requirements listed in NFPA 13.

Installation:

• Install mounting bolt into structure or structural attachment and tighten hex nut until the yoke (U-Shaped Bracket) is tight against the structure or attachment.
• Thread the hanger rod or restraint rod into the hex union until it bottoms. Back rod off a maximum of one turn to allow the hex union to swivel freely.
• Adjust angle as necessary.
• If the AF777 is exposed to vibration from the piping system or the structure, jam nuts may be installed on the mounting bolt and the threaded rod.
• Fire Protection applications shall also be installed per NFPA 13 requirements.

Features:Full 90 degree rotation allows for installation at any angle.

Ordering:Specify figure number, finish, size, and description.

TECHNICAL DATA SHEET